Out of interest, can you perform a K3 update through the P3? -- The secret of life is honesty and fair dealing. If you can fake that, you've got it made. -Groucho Marx
On 15 Apr 2010, at 19:24, Dick Dievendorff wrote: > There are three connections between the P3 and your K3. The necessary cables > are supplied. > > 1) A +12V cable connects between the P3 and the RCA +12V connector on the > back of the K3. > 2) A short coaxial cable with BNC connectors connects to the IF OUT > connector on the KXV3 or KXV3A of your K3. > 3) A short RS-232 cable connects between the P3 and the DB-9 RS-232 > connector on the back of your K3. > > Your PC or microHAM RS-232 connector plugs into the DB-9 connector on the > P3. The P3 passes computer-initiated commands and their responses to/from > your K3. The P3 also communicates with the K3 over this same serial > connection. The PC/microHAM device sees the combination as a K3. > > Note that a computer is *not* required to operate the P3, except for > firmware loading. > > However if you wish to connect a computer to the K3/P3 combination, it goes > onto the back of the P3. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
