On 4/17/2010 11:30 PM, David Quental wrote: > Hello again, > > apart I do not get the transmitter gain on K3 Utility, doing the > transmitter gain on page 49 from Owner's Manual I get 0.0 watts in all > frequencies, however when I press ATU TUNE I get 5.0 watts. > > Any help will be welcome. > > Best 73. > > CT1DRB > David Quental > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > David- Have tried to adjust the WMTR LP or HP in the Config menu? I had email Elecraft about using low power for QRP Contest and they advised me to adjust this setting for low power. They told me that the normal setting is 70 but to achieve what I wanted I have my WMTR LP setting on 180 and my WMTR HP setting on 145. I did this because the power reading from radio was not the same as what showed on my external watt meter. Now they are pretty close. Not for sure if this helps in your question but maybe.
John KM5PS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
