Looks like I am off-base here. Please disregard my post, Derek.
Bill W5VWO

--------------------------------------------------
From: "Bill VanAlstyne W5WVO" <[email protected]>
Sent: Sunday, April 18, 2010 12:27 PM
To: "Derek Cohn/WB0TUA" <[email protected]>; 
<[email protected]>
Subject: Re: [Elecraft] RTTY using DATA mode on K3

> Hi Derek,
>
> When using a computer and sound card to drive the K3 in any digital mode,
> your data mode should be set to DATA A. Somebody will correct me if I'm
> wrong, but I suspect that's your problem.
>
> DATA A mode is basically equivalent to the USB/LSB position, except that
> equalization and compression are disabled.
>
> Bill W5VWO
>
>
> --------------------------------------------------
> From: "Derek Cohn/WB0TUA" <[email protected]>
> Sent: Sunday, April 18, 2010 9:53 AM
> To: <[email protected]>
> Subject: [Elecraft] RTTY using DATA mode on K3
>
>> Hi Everyone,
>>
>> I just bought a K3 a few weeks ago and have been using it on CW.  It's
>> time to play with it a bit on RTTY.  I'm using the Tigetronics Signalink
>> to interface the radio to my PC which is running MMTTY.  When I have the
>> mode switch in the sideband position, copy on the laptop is just fine and
>> the signals display properly on the tuning aids in MMTTY.  I read the
>> manual pages about better performance if the DATA mode is selected.  I
>> switched to the DATA mode and there is very little audio in the speaker
>> and no signals displayed on the tuning aids in MMTTY.  No copy either.  I
>> double-checked the data mode setting and it is AFSK-A which I think is
>> correct.  I must have a setting wrong somewhere.  I've gone over the data
>> section in the manual a few more times but don't see what I'm doing 
>> wrong.
>> Any ideas?
>>
>> Thanks and 73,
>>
>> Derek Cohn
>> Morse Telegraph Club - Alton Chapter
>> Office UD, Sine DJ
>> Amateur Radio Station - WBØTUA
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to