Hello Martin, XV144 integrates with K3 very well. All you need are two coaxial and a interface cable.
However, XV144 is extremely hot even it is used at the rated output of 10W FM. For light duty cycle, it should be less hot. 73 Johnny VR2XMC ----- 郵件原件 ---- 寄件人﹕ DM4iM <[email protected]> 收件人﹕ elecraft <[email protected]> 傳送日期﹕ 2010/4/21 (三) 8:19:13 PM 主題： [Elecraft] XV-series Transverters and K3? Elecrafters, i don't doubt the internal Transverter perfectly integrates in the K3 concept, but how well do the external XV-xxx Transverters integrate? The manual describes integration with a K2 , but not with K3. I have a KXV3A installed in my K3 and a 15Pin cable. A XV-144 is on its way over the pond (if the icelandic volcano permits). Martin -- 73, DM4iM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
