>From what I see in the manual, if a switch is in the direction of the resistors, then the resistors selected by that switch are causing their attenuation. Thus if all switches are away from the resistors, there is no attenuation.
If the switches are above the resistors, and the BNC connectors to the left and right (switches toward you), the attenuation values left to right are 1,1,3,6,10 and 20 dB 73 - Mike WA8BXN -------Original Message------- From: Gary Lee Date: 4/23/2010 10:18:20 PM To: elecraft list Subject: [Elecraft] at1 attenuator questions I have an at1. How do I tell on from off for each switch, and what are the values of each Switch? Totally blind, so need a little help. Thanks and 73. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
