The problem with having the manual notch filter outside the AGC
loop is that if you are trying to notch out a CW signal, although the tone is
eliminated, the notched signal causes the AGC to pump - thus hurting weak
signal
copy. I think whenever you start using the"big tools" you have an idea that you
are not in the "optimum receive situation." For me, the ideal would be "auto
notch" outside the loop and "manual notch" inside the loop.
73, Merle - W0EWM
----------------------------------------------------------------------------------------------------
On 4/26/2010 7:30 PM, N1JM wrote:
>
> It's a shame. Such a sophisticated high end radio and no notch within the agc
> loop.
Part of the problem is that a DSP radio needs to have the notch after
the AGC since part of the function of AGC is preventing the ADC from
being over driven. If the notch is placed BEFORE the AGC detector
the notch will cause the interfering signal to INCREASE at the input
of the ADC.
Yes, it would be nice for the notch to allow the receiver to return
to normal gain when the interfering signal is removed but that would
merely cause the HAGC to come into play.
73,
... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
