Is is possible the output power is set to zero? Is the rig set to CW-TEST mode?
Mark AD5SS On Sun, May 2, 2010 at 3:21 PM, RONALD R FREEMAN <[email protected]> wrote: > > Hi... > > The PTT feature quite working on my K2/100. I've checked the circuit up to > U1 on the SSB Adapter and it appears OK. In receive, pin 6 has approximately > 6 volts on it and with PTT activated on the microphone, it drops to zero. > However, no relays click and no RF out appears in the display. The rig > continues to receive any signal it is tuned to but I can hear my own audio > over that signal if I talk into the Mic. So, I conclude the SSB Adapter is > processing the audio signal from the mic, but where do I check next to see > why it isn't triggering the transmitter? Any ideas appreciated. BTW, "Tune" > works fine with output matching whatever level the display is showing. > > Ron W0LPZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
