Dan, Check the wiring at the external speaker jack carefully. If you mixed up the ground and hot wires at that point, low or no speaker output is the result.
To make a quick check to determine if that is the problem, remove the top cover from the K2 (leaving the speaker connected) - if the speaker volume is OK then but decreases when you mount the top cover, you have the ext spkr jack wired incorrectly and are grounding the speaker output. 73, Don W3FPR Dan Grizzard wrote: > Hello all, > I have recently completed my K2 alignment and finished assembling the top > cover and installing it. > I find I have very low audio from my speaker and must be within a foot or so > to hear it. Both the front and rear > speaker jacks have plenty volume using earphones. Any suggestions? > 73 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
