Hello - I just finished part 1 of building my KX1. When I made the resistance checks on page 26 I had three failures on the checks on U1.
Pin 19 was supposed to be less than 5 ohms, but registered 5M. Pin 23 and 24 were supposed to be greater than 10k, but pin 23 read 3k, and pin 24 was .2 ohms. I resoldered the joints on these pins and rechecked, with no improvement. The checks for U3 and the diodes were good. Any idea what I did wrong? Thanks. 73, Mike, KL7MJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
