Steve, With C36 not installed, you may have a strange sounding sidetone note, but other than that things should work just fine.
73, Don W3FPR steve d wrote: > > > I received my kit on Wednesday and I got to the first alignment already! The > front panel is done, the Control Board is pretty much done, and I started in > on the RF deck. > > However, I am missing one of the caps for the Control Board #272 (.0027uH). > > Before I power up for the first time, am I OK with this stage the way it is > or will that cap play a vital role? It is out of C36 (there are 3 of this > value on the board). The schematic shows it goes between ground and the + > side of U10B (an LMC660). > > You can follow my build progress on my blog at (mycall).com. (I tried sending > the link and the reflector kicked it back - anything other than text gets > "the boot") > > Steve, KC8QVO > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
