Guy Olinger wrote: > That aside, I believe someone using the sub-RX with the TX in split, > while leaving the main RX to feed the P3, would accomplish the same > end.
Afraid not, Guy. Cross-band split is not supported, so the envisaged mode of operation (main RX on 6m feeding the P3, subRX and TX on HF) would not work. You could listen to the subRX on HF, but the TX would have to be on 6m. If the *only* purpose for the panadapter is to act as an indicator of activity on the 6m band, you would hardly need all the integration of a P3 anyway. There are other ways to tell when 6m is open, ranging from www.vhfdx.net/spots/map.php to a simple non-integrated CW Skimmer-type display (with a SoftRock, LP-PAN, etc. - this would still require the mod to the KRX3). That said, I think that once you have used an integrated panadapter, you might not want to give it up. You might find yourself wanting to use the panadapter full-time with the main RX and falling back on other methods to tell you what's happening on 6m, perhaps supplemented by leaving the subRX on the 6m calling frequency when you weren't using it on HF for split operation, diversity mode, etc. 73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
