The KXV3 is a back panel install, I'd do that first. You'll need to remove the front panel board to install the 2nd receiver Aux DSP board and the KDVR3. Install both the Aux DSP board from the 2nd receiver and the KDVR3 board while the front panel is open. You can reinstall the front panel and not enable the 2nd receiver (leave the KRX3 menu option disabled for a bit). You can enable and test the KDVR3.
Then install the sub receiver RF board (the l-shaped one in the steel can) last, and then enable the KRX3 menu option. YMMV, but that's how I'd do it. Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of stephen pearce Sent: Wednesday, May 26, 2010 5:51 PM To: [email protected] Subject: [Elecraft] order of construction for k3 Hi I have the 2nd rx, dvr and xv3 ready to install preparatory for the arrival of the p3. I want to install all 3 in one go. The manuals are written as if you were starting from scratch each time. Could someone (maybe who has already done this) give me some advise of the sequence of approach given that I want to do all 3 installations in one go Mni Tnx 73 de zl1any -- Stephen Pearce Critical Care Whangarei ph 021 390 997 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
