Thanks Lyle and Joe.
I am all set. Tested this morning with a friend, 75 baud.
400Hz filter plus Dual PB at this end and all was working well
even with low signal in the noise.
73, Claude
----- Original Message -----
From: Joe Subich, W4TV
To: Claude Du Berger ; Elecraft Reflector
Sent: Monday, May 31, 2010 11:09 PM
Subject: Re: [Elecraft] Bartg Sprint 75
Necessary bandwidth for 75 baud 170 Hz shift RTTY is
about 360 Hz - approximately (75/2 * 5 + 170). A 400
Hz roofing filter is probably close to optimum for
75 baud RTTY.
Note - 200 Hz is theoretically too narrow for even 45.45
baud RTTY (necessary bandwidth approximately 280 Hz).
73,
... Joe, W4TV
On 5/31/2010 9:38 PM, Claude Du Berger wrote:
> Hello Group.
> June 12 is the Bartg Sprint 75 (test) Contest.
> At this speed, what is the best filter to use and can we
> still use the so sharp Dual PB?
>
> Claude Du Berger
> [email protected]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
