Jerry, Are you referring to the "Overload Detector" being tripped? If so, try adding a .01 uF capacitor between the base and emitter of Front Panel Q7. It seems some 2N2222s are a bit more sensitive to noise on the overload detector output line. I know of at least 2 that were cured with this fix. Very few transverters have this problem, but for those that do, it is an easy fix..
73, Don W3FPR n0jrn wrote: > Gang: having some problems with my XV50 going into overload. I'm > looking for some ideas of how to isolate the problem. > > Wondered if anyone else has had a problem and what you did to address it. > Not much about this in the archives. > > I have installed the bypass caps per the last builders alert. > > That didn't help this issue. Doesn't matter which mode I'm running. Still > does it ! I am running vox when in SSB. > > Anyway, just curious if anyone has any pointers. > > Thanks and 73: Jerry N0JRN > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
