Paul, That is not an easy question to answer, and for your particular case, we do not have enough facts. It would be necessary to know the configuration of the radial field for that vertical, then plug that information into an antenna modeling program to find the impedance at the feedpoint to the antenna for any frequency of interest. After that, you must specify the feedline (both the type, the velocity factor and the length), as well as the details of any matching network at the base of the antenna. It is not a simple question, and the right answer is "maybe"
Once all that information is available, the feedpoint impedance at the shack end of the transmission line can be calculated. With the feedpoint impedance at the shack end known, then the L network values to match it to 50 ohms resistive can be calculated. A look at the specifications for the KAT2 indicate the maximum inductance available and the maximum capacitance. If the required inductance and capacitance for the calculated L network is less than the maximum values available for the KAT2, then the answer is a definite yes. A 43 ft vertical is a bit short on 80 (but not impractical). There was a recent article in QST with a tuner at the base of a 43 ft vertical to provide a good match on 80 and 160. A 43 ft vertical is a 43 ft vertical, and the major difference between them is the effective electrical diameter of the radiator, the mechanical construction, and the price - take your pick. There is no magic in the 43 ft. length except it is practical to erect without a large crew tugging on guy lines, many can simply be "walked up". 73, Don W3FPR Paul Huff wrote: > Does anyone have any experience with trying to match one of these 43-ft > verticals, that are being offered by several manufacturers, using the K2s > internal ATU? Is it able to find a match on 80-meter CW? Are there any > particular brands of 43-ft verticals that you like or don't like? Most of > these > verticals that I have seen are in the mid to upper $300 range, except for the > fiberglass one from S9 Antennas. Any opinions on that particular antenna? > > Thanks in advance for any information offered. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
