While disassembly is straightforward, there are a few "helps" that are handy, such as removing the screw from the 2D connector on the RF Board, that one is not intuitive. Fortunately there a several mod instructions that detail the removal of the front panel and the DSP board so you can get to the encoders - download the instructions for the DSP Upgrade board.
73, Don W3FPR Stan Gibbs wrote: > John, > > The disassembly is pretty straightforward. Though, if you didn't build your > K3, it might seem a bit more daunting. The process is just about like > installing the sub-receiver in an already built K3. > > I would expect that Dale would have checked the encoder-socket integrity when > he had it on the bench. > > 73, > Stan > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
