Lot of trouble to keep from turning a knob. Besides, there is more needed to do a comparison with the linear out of line: make sure the ATU is out of BYPASS mode, then hit ATU TUNE so that the power reading at 100w is as little reactive as possible at the PA output. Then make your comparison.
73, Guy. On Sun, Jun 13, 2010 at 5:36 AM, Oleg Zakhodyakin <[email protected]> wrote: > > According to some recent discussions about ALC settings, the best way, is to > set power level for each band to feed Linear. But in some cases, we need to > put "standart" 100Wt into antenna, say,for a quick comparison with a > neighbor or just to check conditions with a distant station. Is it possible > to configure K3 with one button click to change PWR SET from "per band" > "locked" to 100wt unlocked? Or it could be "a future request"? > > 73's Oleg ua4hej > K3 #3731 > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Power-settings-tp5173852p5173852.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
