Well, thanks for all the replies to my message below. The result is very mixed and discouraging. It appears that I'm in a dilemma.
I either stay at the level I'm at in the K3, get rid of the the K3 or the microKEYER2R+ or Run the risk of the firmware update not working. I don't really want to get rid of anything, nor do I want to have a screw up on the Firmware upgrades. I got to figure out what to do. Again, thanks for your input. de K2GN - Larry - <http://k2gn.com/> http://k2gn.com K3 S/N - 3278 P3 S/N - ???? (Ordered) From: Larry - K2GN [mailto:[email protected]] Sent: Tuesday, June 15, 2010 7:16 PM To: Elecraft - K3 Subject: K3 Firmware updating Is there a safe way to update a K3 through the microHAM router? I don't like moving the cables for every update. Something is going to wear out or break. Difficult to do it with my 1 good hand . Can I put a "Y" adaptor on the RS232 and run a USB to my laptop, and leave the microHAM powered off? Laptop isn't connected to the radios at all. I just need an easier way to stay up to date. Same with using the K3 EZ and K3 Util programs. Any ideas are greatly appreciated. de K2GN - Larry - http://k2gn.com <http://k2gn.com/> K3 S/N - 3278 P3 S/N - ???? (Ordered) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
