I think I found a sheet that says its "LMR600" or at least its in a grouping that makes me think it might be LMR600.
OD on the stuff is .591 by my measurements. >From my calculation a 5:1 mismatch on 100 feet of LMR-400 would still get me 75watts out the antenna at 30Mhz and things only get better as I head down into 20 and 40 meters. ~Brett (N7MG) On Tue, 2010-06-22 at 20:51 -0700, Wes Stewart wrote: > loss is meaningless. What is the diameter? > > I've been out of the industry for some time, but as I recall Amphenol > didn't make bulk cable, so they likely bought the cable from Belden, > Times, etc and built a cable assembly for Cisco. > > I think your original premise is flawed. If you want to move the > match point of a 43' vertical 100' into your shack you probably should > be looking for some 7/8" Helix. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
