After my tilt-bail struggle, I moved on the the initial test of the K2 with mixed results:
After setting all pots to the recommended positions, I started up the K2 and all went according to the manual. I got the INFO 201 followed by the frequency (7100.00C). After restart, the Elecraft logo came on and then the frequency as expected. Intermittantly, however, "P 14.8" kept coming up alternating with the frequency display. I could only make this stop by increasing the power away from minimum. In addition, tapping the display button had no efffect at all. The encoder test went fine, with the frequency changing nicely. I noticed that the keyer knob changed the keyer speed, but so did the power knob when I rotated it. The power reading also changed. I will keep looking but would appreciate any ideas. Thanks Brian Denley http://home.comcast.net/~b.denley/index.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
