Could you have selected ANT2 or the RX ANT on 20M? The K3 remembers these by band so it could be set wrong on 20M and correct on the other bands.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 On Sun Jun 27 13:30 , "JIM DAVIS" sent: >Gentlemen, > >A few days ago I was listening on my K3 on 20m (either mode/band segment) and instead of the usual >"S5" noise indication on my S-meter it was only (S-1) even with the preamp on! This also occurs on >17m as well! While all the other bands show the regular/typical reading (S-5 >plus or minus a >smidge!) I know the my C3 yagi works on those bands because we also use a Icom 7200 (standby rig) >and it's S-meter readings on ALL BANDS including 20 and 17 are NORMAL/as to be expected! > >Any IDEAS??? > >Regards, > >Jim/nn6ee >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: Elecraft@mailman.qth.net','','','')">Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html