How are you selecting to enable your PR6? Are you using the DIGOUT line? If so you should be able to see what is going on by looking at the DIGOUT line.
You will need the RX ant enabled in order to use the PR6. The PR6 is inserted into your RX_ANT loop when its enabled. Otherwise it simply passes those through to the BNC's on the other side. ~Brett (N7MG) On Mon, 2010-06-28 at 13:01 -0500, Bill K9YEQ wrote: > Seems when I have the Sub Receiver set on 6 Mtrs and the main band on 75, > the PR6 isn't getting the signal through the RX. Or do I not need the RX on > to use the PR6, or is the PR6 out of circuit when in this configuration? > > > > Bill > > K9YEQ > > K2 and KX1 field tester, K3 and modules > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
