Good show kind sir! This is exactly what I was thinking of when I was trying to come up with how it would need to be coded.
Really looking forward to mine shipping! ~Brett (N7MG) On Mon, 2010-06-28 at 21:19 -0700, Alan Bloom wrote: > > Many also didn't like the slight lag in turning the knob and seeing > > the signals. As you tune the knob on the K3 the signals kinda drop > > out and you have to stop your QSY then let the signals come up out of > > the noise again and then dial into it... > > That is probably caused by averaging. I believe that with PowerSDR, > whenever you tune the K3, the old spectrum is still present in the > averaging memory and you have to wait an averaging time constant or two > to see the new spectrum. > > > I hope that the P3 is a lot faster and the signals stay visible > > while fast QSYing. > > The P3 automatically re-sets averaging (and peak hold) whenever the K3 > frequency changes. So you see an un-averaged signal immediately after > tuning and then the signal smooths out as the averaging memory is > refreshed. But at least the signal never goes away. > > Alan N1AL > > > On Mon, 2010-06-28 at 12:57 -0700, Brett Howard wrote: > > I should add though that they so loved the ability to click around on > > stations just like they can with their N1MM band map that they usually > > kept causing themselves the problem. They'd swear off using PowerSDR > > and said I'm just going to leave the focus on N1MM and not worry about > > it anymore but they'd keep seeing something they'd want to go after > > and the point/click ease was just too attractive. Many also had > > issues with the right click to go between pan mode and point/shoot > > mode. > > > > Many also didn't like the slight lag in turning the knob and seeing > > the signals. As you tune the knob on the K3 the signals kinda drop > > out and you have to stop your QSY then let the signals come up out of > > the noise again and then dial into it... I hope that the P3 is a lot > > faster and the signals stay visible while fast QSYing. I don't > > remember being able to do a whole lot of that when I saw it in Seaside > > but there weren't a lot of signals all over just the 4 that were in > > the recorder... > > > > ~Brett (N7MG) > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
