Hi to the group, I have connected my K3 to my PC so I can use WSJT, my sound card is the 'Sound Blaster Audigy 2 ZS Audio'
I seem to have some sort of audio feed back when I get the radio to TX. The sound card output is directly connected to the K3, and for the moment PTT keying is via a USB micro ham unit. When I use the microham device router to test the system by TXing a test signal (standard single tone) all 'appears' to be OK, but, what I hear (from the monitor in the K3) is a little distorted, and this distortion gets worse the higher the MON is set at (currently at 10) once MON goes higher than 15 or 16, I can hear distortion. I thought it was perhaps an issue with the sound card, so I've tried the 'built in' card on the PC and there's no difference. My next thought is that it's a setting I'm missing within the K3, but I can't see what... MON = 10 LINE = 36 but altering this doesn't affect the signal distortion There also appears to be a delay in sending tones from WSJT, I'm sure that this is a software issue, but in this delay there's about a second of what can only be described as hash. Anyone got any suggestions on what I can check next?? 73, Andy http://gd0tep.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
