My K2/100 seems to have developed an issue. On key down I seem to be getting maximum power output, irrespective of where the power control is set. I am getting no power output indication at all on the inbuilt power meter in the K2!
When I press tune, the K2 tells me I have 9.9:1 SWR and only a few watts of output, but my external meter tells me I have full output (well over 100w, and a 1:1 SWR). This happens irrespective of whether I use a dummy load or antenna. The K2 seems to work normally with the KPA100 disconnected, and RX is fine. I'm guessing I have a issue with the SWR/power output sensing in the KPA100, but would apreciate some help on what components to check. The K2/100 has been working fine to this point. Cheers David, VK2NU ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
