This is the sort of response you might get when you have chosen a different COM port than the one your K3 is connected to. The COM port you've chosen is echoing everything sent to it. Maybe it's a modem.
Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Milward Sent: Tuesday, July 06, 2010 6:11 AM To: Elecraft Reflector Subject: [Elecraft] Elecraft K3 Utility Help I'm doing something wrong...................and I don't know what it is I cannot get the K3 Utility to upload new "versions" to the rig. I also cannot upload macros. I was able to do both a few months ago when I first got the rig. !!!news flash....I.m basically computer illiterate I get this when I attempt to upload "versions" 08:54:08 Ready 08:54:08 K3 bootloader is ready for MCU firmware load. COM3 RS-232 speed 38400 bps 08:54:39 Sending firmware file hmcu0397.hex to MCU 08:54:39 Send MCU firmware failed at load address x0800 08:54:39 MCU firmware load failed 08:54:39 Clock "Close" to close this window tia es 73 Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
