Scott, KRC2 firmware version 1.5 *should* include 6 meters? Have you tried to see if the XV1 outputs activate when the K3 is set to 6 meters? It is supposed to be activated by the AUXBUS. Jack Brindle's post of 5/30/2010 makes a definitive statement: -------------------------------------------------------
The latest KRC2 code adds 6-meter support for the K3. It enables the XV1 terminal when the K3 indicates it is on 6 meters, and when cycling through the band selections with the F1 and F2 keys. Jack Brindle, W6FB ------------------------------------------------------ Have you tried downloading a fresh copy of the KRC2 Download Program? 73, Don W3FPR Scott Prather wrote: > I have a KRC2 that, among other things, I would like to use to switch > between an HF antenna below 30 MHz and a 6 M antenna when the 50 MHz band is > selected. My KRC2 microcontroller came with V1.5 from the factory. > > snip... > > I can't get the KRC2 configuration utility to work (it will connect long > enough to read the FW version then loose connectivity), so setting an > alternative bandmap isn't possible using this tool. Has anyone learned the > secret for setting a stand-alone switched output on 6 meters from the KRC2? > Will XV1 be enabled for 6 meters if a certain jumper is installed? > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
