Do you use the quick-memory buttons to change bands? If so, you have to store AFSK-A when you write to memory.
Dave Hachadorian, K6LL Big Bear Lake, CA -------------------------------------------------- From: <[email protected]> Sent: Tuesday, July 06, 2010 4:20 PM To: <[email protected]> Subject: [Elecraft] K-3: AFSK-A switching to FSK-D > Hi Guys, > > I'm running AFSK-A on my K-3 but it's often switching to FSK-D > on it's > own. I thought the once I maually set the Mode to AFSK-A > using the "DATA MD" > button that the K-3 would stay put on AFSK-A each time I > returned to that > band. If I change band and return it's back on FSK-D. I > notice it switches > from AFSK-A to FSK-D even when operating on the same band and > clicking on > a Packet Spot. > > Is there something else that must be done after I select AFSK-A > with the > "DATA MD" button to store this in memory? > > Thanks! > > Dick- K9OM > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
