Folks, in desperation, I turn to this helpful list; I am having trouble with my setup which includes a K3, an Icom PW-1 and a microHAM Station Master.
I finally got around to setting up my Station Master, and have run into a series of problems which I am hoping to resolve so that I can start enjoying my SM. The set up: I am using a K3 transceiver and an Icom PW-1 amplifier, something SM is supposed to do. On initial hook up and router configuration, PTT would work and no alarm light came on. The amp would not track or follow the K3 band changes, etc. I updated the Router software, and checked my configuration (this is where I complain that the user's manual is not up to date with the router software). My first problem: The Alarm light stays on now (not flashing). If I select PA status for the second display line, it shows : PA - no control (which is true, but sad). I decided to try a firmware upgrade; this is when my next problem, a real show stopper, came in: Upgrading to firmware revision 2.8 bombs about halfway through, and leaves SM dead. Trying to restore to revision 2.2 bombs immediately, and leaves SM dead. The net result, no microcode in the unit, no use to me, unable to fix it from here with the little I know. Any help getting things running would be greatly appreciated. Thanks and 73 de Dave, W5SV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
