On my K3, with the VOX set to off, the K3 still keys the PTT line out to my amp when I hit the paddle. It doesn't actually transmit any CW unless I hit the PTT footswitch, but it seems to key the PTT line for some odd reason.
73 Gary ZL2iFB PS Hi Ian! > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W6NEK > Sent: Thursday, 8 July 2010 9:19 AM > To: Elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 Disabling VOX on CW. > > Hello Ian, > While in CW mode just "press and hold" the VOX function Off > (press left side > of Band Select Button in upper left corner of K3). With the > VOX function > Off in CW mode the PTT function will be enabled which will > allow you to use > your foot switch for Tx/Rx change over. > > 73, > Frank - W6NEK > > ----- Original Message ----- > From: "G0AFH" <g0...@g0afh.com> > To: <Elecraft@mailman.qth.net> > Sent: Wednesday, July 07, 2010 1:53 PM > Subject: [Elecraft] K3 Disabling VOX on CW. > > > > Hi > > > > I would like to disable VOX in CW mode so that when I touch > the key the > > rig does not go into transmit. Is this possible? > > > > My primary use for the K3 is to drive transverters and I use manual > > tx/rx change over or a foot switch - even on cw. > > > > 73 > > Ian > > G0AFH. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
