On Mon, Feb 4, 2013 at 11:15 AM, <[email protected]> wrote:
> Today's Topic Summary > > Group: http://groups.google.com/group/electricvlsi/topics > > - About Electric Silicon Compiler <#13ca40f6458e1568_group_thread_0>[1 > Update] > > About Electric Silicon > Compiler<http://groups.google.com/group/electricvlsi/t/f0f060c8dcd3d4cf> > > Steven Rubin <[email protected]> Feb 03 09:05AM -0800 > > At 01:16 AM 2/1/2013, you wrote: > >After that electric produce a new library called "sclib", full of > >some layouts gates. > > >Can you please give me any help about that ? > > The compiler places and routes cells from a standard-cell library. > One such library comes with Electric, but it is old and you will > probably want your own. > > An initial effort was made due to make able Electric use the Alliance EDA tool VHDL-to -netlist compiler: http://java.net/projects/electric-alliance yet the problem is importing of "Alliance cells" (the Alliance techlib) to Electirc, help is welcomed... Alliance EDA tool is here: http://sourceforge.net/projects/alliancecad/ , it has it's own workflow to compile to silicone automatically, yet it's also a week point. Alliance VHDL to netlist compiler is acceptable, IMHO. The only problem is importing cells to Electric > > The manual describes the cells that the > library should have. The compiler places and routes a netlist that > makes reference to the cells in the library. If you have VHDL code, > it is compiled to the netlist first. And if you are converting a > schematic cell, then it actually generates VHDL for that schematic, > compiles the VHDL, and then places and routes the netlist. > > So you can see what it's doing by looking at the VHDL cell that gets > created. It should refer to cells in your standard cell library. > > -Steven Rubin > > > > You received this message because you are subscribed to the Google Group > electricvlsi. > You can post via email <[email protected]>. > To unsubscribe from this group, > send<[email protected]>an empty message. > For more options, > visit<http://groups.google.com/group/electricvlsi/topics>this group. > > -- > You received this message because you are subscribed to the Google Groups > "Electric VLSI Editor" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
