I used information from here and all worked fine: http://cmosedu.com/cmos1/mosis/mosis.htm Regards
BenjamÃn 2018-05-03 9:04 GMT-03:00 Gavin Abo <[email protected]>: > Sorry, I have never had an Electric layout fabricated by the MOSIS > foundry. So I don't know. > > Have you tried contacting and asking the MOSIS foundry, it looks like > their contact information should be at: > > https://www.mosis.com/support/contact-us > > > On 5/2/2018 4:10 PM, Oriero Enahoro wrote: > >> I am trying to fabricate my design via MOSIS and i have a question >> regarding the model file. >> This is my first time through the process and am looking for some advice >> and suggestions from anyone who have already created a chip from a GDS II >> produced in Electric. >> As far as i know, for fabrication the foundry usually provides a >> technology model file to use and I was wondering if the C5 model file that >> came with electric is compatible with MOSIS or I have to look for a means >> of getting the model file from MOSIS. >> > > -- > You received this message because you are subscribed to the Google Groups > "Electric VLSI Editor" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Electric VLSI Editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
