Hi Joseph,
Thanks for the answer, I made the changes you suggested. In my previous post I
said that after adding new data to the .data section, the .data section get
moved to another memory address. I inspected this more carefully using readelf
-S hello and I discovered is that actually none of the memory sections get
moved around (as in all the memory sections start at the same address before
and after editing the elf file) what changes is the Offset Align for the .data
section from 1030 to 930 but it's still inside the memory range of the .data
section, I'm not sure if this is good or bad.
My problem is that let's say I have two global variables defined in hello.c and
I want to modify the value of the first variable, using the code that I have
below, the program actually "overwrites" the variable with the value that I'm
modifying and the second variable gets erased. Using the code that I have below
I get an error "Error in ./prog4: double free or corruption(out):
0x00007ffd98fa9640 *** Aborted (core dumped).
My other question is how can I specify which global variable I want to modify?
do I assign to the "data" type the offset align of the global data I want to
modify? as in
data = offset align; ?
#include <err.h>
#include <fcntl.h>
#include <gelf.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <unistd.h>
#include <bsd/vis.h>
int
main(int argc, char **argv)
{
int fd;
Elf *e;
char *name, *p, pc[4*sizeof(char)];
Elf_Scn *scn;
Elf_Data *data;
GElf_Shdr shdr;
GElf_Sym sym;
size_t n, shstrndx, sz;
uint32_t some_string[] = {0xaf};
if (argc != 2)
errx(EXIT_FAILURE, "usage: %s file-name", argv[0]);
if (elf_version(EV_CURRENT) == EV_NONE)
errx(EXIT_FAILURE, "ELF library initialization "
"failed: %s", elf_errmsg(-1));
if ((fd = open(argv[1], O_RDWR, 0)) < 0)
err(EXIT_FAILURE, "open \%s\" failed", argv[1]);
if ((e = elf_begin(fd, ELF_C_RDWR, NULL)) == NULL)
errx(EXIT_FAILURE, "elf_begin() failed: %s.",
elf_errmsg(-1));
if (elf_kind(e) != ELF_K_ELF)
errx(EXIT_FAILURE, "%s is not an ELF object.",
argv[1]);
if ((scn = elf_getscn(e, 24)) == NULL)
errx(EXIT_FAILURE, "elf_scn() failed: %s.",
elf_errmsg(-1));
if (gelf_getshdr(scn, &shdr) != &shdr)
errx(EXIT_FAILURE, "getshdr(shstrndx) failed: %s.",
elf_errmsg(-1));
data = NULL;
if ((data = elf_getdata(scn , data)) == NULL)
errx(EXIT_FAILURE, "elf_newdata() failed: %s.",
elf_errmsg(-1));
data ->d_align = 1;
data ->d_off = 0LL;
data ->d_buf = some_string;
data ->d_type = ELF_T_WORD;
data ->d_size = sizeof(some_string);
data ->d_version = EV_CURRENT;
(void) printf(".data: size=%jd\n", (uintmax_t)shdr.sh_size);
if(elf_update(e,ELF_C_NULL) < 0 )
errx(EXIT_FAILURE, "elf_update(NULL) failed: %s.",
elf_errmsg(-1));
(void) elf_flagdata(data, ELF_C_SET, ELF_F_DIRTY);
if(elf_update(e,ELF_C_WRITE) < 0 )
errx(EXIT_FAILURE, "elf_update(NULL) failed: %s.",
elf_errmsg(-1));
if(elf_update(e,ELF_F_LAYOUT) < 0 )
errx(EXIT_FAILURE, "elf_update(NULL) failed: %s.",
elf_errmsg(-1));
(void) putchar('\n');
(void) elf_end(e);
(void) close(fd);
exit(EXIT_SUCCESS);
}
My hello.c file still the same. Thanks for any suggestions.
________________________________
From: Joseph Koshy <jkoshy.opensou...@gmail.com> on behalf of Joseph Koshy
<jko...@users.sourceforge.net>
Sent: Sunday, June 21, 2020 3:42 PM
To: silver kapo <hect...@hotmail.com>
Cc: elftoolchain-developers@lists.sourceforge.net
<elftoolchain-developers@lists.sourceforge.net>
Subject: Re: [Elftoolchain-developers] Problem with writing to an elf file
using libelf
> I'm trying to modify the data of a global
> variable in a C file. I was able to write
> data to the .data section but I had two
> problems. The first one is that when I
> open the edited hex file I notice that my
> .data section has shifted from 0x1030(where
> my .data section starts in the elf file)
> to ~0x0930. And the second problem is that
> instead of overwriting in the address location
> of my global variable, it writes the data in
> the next memory address. I.E let's say the
> global variable is defined at 0x1030 the new
> data get written at 0x1031 instead of 0x1030.
...
> if ((data = elf_newdata(scn)) == NULL)
> errx(EXIT_FAILURE, "elf_newdata() failed: %s.",
> elf_errmsg(-1));
This call to elf_newdata() would add new data to
the section 'scn', changing its size and possibly
causing the layout of the ELF object to change.
If you would like to modify the existing content
of the section without changing its size or
layout, you could try the following:
- read in the section's contents using elf_getdata(),
- change the contents of the section (pointed to by the
d_buf member of the Elf_Data descriptor returned
by elf_getdata()),
- set the ELF_F_DIRTY flag on the Elf_Data descriptor
using elf_flagdata(),
- call elf_update() as before.
You might also want to set the ELF_F_LAYOUT flag
on the Elf object, to turn off libelf's default
layout rules.
Regards,
Joseph Koshy
_______________________________________________
Elftoolchain-developers mailing list
Elftoolchain-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/elftoolchain-developers
