The dmesg from the system when booting with ACPI enabled is attached. On Thu, 21 Aug 2014 12:06:40 -0500 Darren Hart <[email protected]> wrote:
> Please send the full dmesg. > > -- > Darren > > On 8/21/14, 11:48, "jezra" <[email protected]> wrote: > > >Yes, I was booting "quiet". The issue seems to be with ACPI. However, > >attemping to boot with acpi=off is causing other issues. Although I > >can live with a 3 minute boot time for a machine that will rarely if > >ever get shutdown, I would certainly prefer to have a fast booting > >machine that has a kernel with GPIO support. If I may ask, what > >system are you using? > > > > > >On Wed, 20 Aug 2014 20:49:58 +0000 > >"Hawley, John" <[email protected]> wrote: > > > >> Are you running with quiet or something else that would block the > >> output? I don't think I've seen that with a Fedora 3.15 or 3.16 > >> kernel. I'm wondering if there isn't something else in the boot > >> process that's causing the hang, networking perhaps? > >> > >> - John > >> > >> > -----Original Message----- > >> > From: [email protected] [mailto:elinux- > >> > [email protected]] On Behalf Of jezra > >> > Sent: Sunday, August 10, 2014 1:26 PM > >> > To: MinnowBoard Development and Community Discussion > >> > Subject: [MinnowBoard] bootup hangs at intel_rapl no valid rapl > >> > domain > >> > > >> > hello, > >> > I'm running Debian with a stock 3.14 kernel and during boot of my > >> > Minnowboard Max there is a hang of about 30+ seconds and the only > >> > display on the screen is "intel_rapl no valid rapl domain" > >> > > >> > Does anyone know of any boot arguments I can use to remove this > >> > issue and speed up my boot time? > >> > > >> > Jezra > >> > > >> > Web: http://www.jezra.net > >> > Status: http://status.jezra.net > >> > Coffee: http://coffee.jezra.net > >> > _______________________________________________ > >> > elinux-MinnowBoard mailing list > >> > [email protected] > >> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > >> _______________________________________________ > >> elinux-MinnowBoard mailing list > >> [email protected] > >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > >_______________________________________________ > >elinux-MinnowBoard mailing list > >[email protected] > >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard > > > >
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14-2-amd64 ([email protected]) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=b062771e-302a-42b4-8563-46d72c2614dd ro [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000079c02fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000079c03000-0x000000007a502fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007a503000-0x000000007a602fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a603000-0x000000007a642fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007a643000-0x000000007affffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by EDK II [ 0.000000] efi: ACPI=0x7a642000 ACPI 2.0=0x7a642014 SMBIOS=0x79cfe000 [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB) [ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB) [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fd1000) (14MB) [ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000fd1000-0x0000000020000000) (496MB) [ 0.000000] efi: mem06: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB) [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000020100000-0x0000000036612000) (357MB) [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000036612000-0x0000000037301000) (12MB) [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037301000-0x0000000052e48000) (443MB) [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000052e48000-0x0000000071000000) (481MB) [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000071000000-0x0000000071020000) (0MB) [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000071020000-0x0000000078163000) (113MB) [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000078163000-0x0000000079203000) (16MB) [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000079203000-0x00000000797c5000) (5MB) [ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000797c5000-0x0000000079a03000) (2MB) [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000079a03000-0x0000000079bda000) (1MB) [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000079bda000-0x0000000079be4000) (0MB) [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x0000000079be4000-0x0000000079c03000) (0MB) [ 0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x0000000079c03000-0x0000000079d03000) (1MB) [ 0.000000] efi: mem20: type=5, attr=0x800000000000000f, range=[0x0000000079d03000-0x0000000079f03000) (2MB) [ 0.000000] efi: mem21: type=0, attr=0xf, range=[0x0000000079f03000-0x000000007a503000) (6MB) [ 0.000000] efi: mem22: type=10, attr=0xf, range=[0x000000007a503000-0x000000007a603000) (1MB) [ 0.000000] efi: mem23: type=9, attr=0xf, range=[0x000000007a603000-0x000000007a643000) (0MB) [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000007a643000-0x000000007b000000) (9MB) [ 0.000000] efi: mem25: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem26: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS MNW2CRB1.X64.0071.R30.1406251904 06/25/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFD00000 mask FFFD00000 write-protect [ 0.000000] 1 base 000000000 mask FC0000000 write-back [ 0.000000] 2 base 040000000 mask FE0000000 write-back [ 0.000000] 3 base 060000000 mask FF0000000 write-back [ 0.000000] 4 base 070000000 mask FF8000000 write-back [ 0.000000] 5 base 078000000 mask FFC000000 write-back [ 0.000000] 6 base 07BE00000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE [ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE [ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x79400000-0x795fffff] [ 0.000000] [mem 0x79400000-0x795fffff] page 2M [ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x78000000-0x793fffff] [ 0.000000] [mem 0x78000000-0x793fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff] [ 0.000000] [mem 0x20100000-0x201fffff] page 4k [ 0.000000] [mem 0x20200000-0x77ffffff] page 2M [ 0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x79600000-0x79c02fff] [ 0.000000] [mem 0x79600000-0x79bfffff] page 2M [ 0.000000] [mem 0x79c00000-0x79c02fff] page 4k [ 0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7a643000-0x7affffff] [ 0.000000] [mem 0x7a643000-0x7a7fffff] page 4k [ 0.000000] [mem 0x7a800000-0x7affffff] page 2M [ 0.000000] RAMDISK: [mem 0x36612000-0x37300fff] [ 0.000000] ACPI: RSDP 000000007a642014 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 000000007a6410e8 00007C (v01 INTEL EDK2 00000003 01000013) [ 0.000000] ACPI: FACP 000000007a640000 00010C (v05 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: DSDT 000000007a631000 00AE92 (v02 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: FACS 000000007a5a1000 000040 [ 0.000000] ACPI: UEFI 000000007a5a4000 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: HPET 000000007a63f000 000038 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: LPIT 000000007a63e000 000104 (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: APIC 000000007a63d000 000084 (v03 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 000000007a63c000 00003C (v01 INTEL EDK2 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 000000007a62b000 000763 (v01 PmRef CpuPm 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 000000007a62a000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 000000007a629000 00017A (v01 PmRef ApTst 00003000 INTL 20120518) [ 0.000000] ACPI: SSDT 000000007a628000 0003E6 (v01 Intel_ IsctTabl 00001000 INTL 20120518) [ 0.000000] ACPI: FPDT 000000007a627000 000044 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007affffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7affffff] [ 0.000000] NODE_DATA [mem 0x79bfd000-0x79c01fff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880075c00000-ffff8800777fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0x79c02fff] [ 0.000000] node 0: [mem 0x7a643000-0x7affffff] [ 0.000000] On node 0 totalpages: 500828 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6832 pages used for memmap [ 0.000000] DMA32 zone: 496832 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79c03000-0x7a502fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a503000-0x7a602fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7a603000-0x7a642fff] [ 0.000000] e820: [mem 0x80000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079400000 s86080 r8192 d24512 u524288 [ 0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 493918 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=b062771e-302a-42b4-8563-46d72c2614dd ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1920188K/2003312K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 83124K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1024 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Maximum core-clock to bus-clock ratio: 0xa [ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz [ 0.000000] TSC runs at 1332000 KHz [ 0.000000] lapic_timer_frequency = 532800 [ 0.000000] tsc: Detected 1332.000 MHz processor [ 0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj=5328000) [ 0.000062] pid_max: default: 32768 minimum: 301 [ 0.000093] ACPI: Core revision 20131218 [ 0.019707] ACPI: All ACPI Tables successfully acquired [ 0.020445] Security Framework initialized [ 0.020472] AppArmor: AppArmor disabled by boot time parameter [ 0.020479] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.020816] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022201] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.022861] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.022887] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.023331] Initializing cgroup subsys memory [ 0.023357] Initializing cgroup subsys devices [ 0.023367] Initializing cgroup subsys freezer [ 0.023375] Initializing cgroup subsys net_cls [ 0.023383] Initializing cgroup subsys blkio [ 0.023390] Initializing cgroup subsys perf_event [ 0.023446] CPU: Physical Processor ID: 0 [ 0.023454] CPU: Processor Core ID: 0 [ 0.023464] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.023464] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029519] mce: CPU supports 6 MCE banks [ 0.029542] CPU0: Thermal monitoring enabled (TM1) [ 0.029559] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.029559] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.029559] tlb_flushall_shift: 6 [ 0.029731] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000) [ 0.035269] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074982] smpboot: CPU0: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz (fam: 06, model: 37, stepping: 03) [ 0.075007] TSC deadline timer enabled [ 0.075032] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.075053] ... version: 3 [ 0.075059] ... bit width: 40 [ 0.075064] ... generic registers: 2 [ 0.075070] ... value mask: 000000ffffffffff [ 0.075075] ... max period: 000000ffffffffff [ 0.075081] ... fixed-purpose events: 3 [ 0.075086] ... event mask: 0000000700000003 [ 0.076666] x86: Booting SMP configuration: [ 0.076682] .... node #0, CPUs: #1 [ 0.095794] x86: Booted up 1 node, 2 CPUs [ 0.095805] smpboot: Total of 2 processors activated (5328.00 BogoMIPS) [ 0.095992] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.096858] devtmpfs: initialized [ 0.107591] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.107606] PM: Registering ACPI NVS region [mem 0x7a503000-0x7a602fff] (1048576 bytes) [ 0.108080] pinctrl core: initialized pinctrl subsystem [ 0.108258] NET: Registered protocol family 16 [ 0.108567] cpuidle: using governor ladder [ 0.108576] cpuidle: using governor menu [ 0.108689] ACPI: bus type PCI registered [ 0.108699] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.108937] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.108949] PCI: not using MMCONFIG [ 0.108956] PCI: Using configuration type 1 for base access [ 0.111392] bio: create slab <bio-0> at 0 [ 0.111785] ACPI: Added _OSI(Module Device) [ 0.111795] ACPI: Added _OSI(Processor Device) [ 0.111802] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.111808] ACPI: Added _OSI(Processor Aggregator Device) [ 0.165195] ACPI: SSDT 000000007a4fda98 000311 (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.166295] ACPI: Dynamic OEM Table Load: [ 0.166306] ACPI: SSDT (null) 000311 (v01 PmRef Cpu0Ist 00003000 INTL 20120518) [ 0.166618] ACPI: SSDT 000000007a4fc918 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.167683] ACPI: Dynamic OEM Table Load: [ 0.167693] ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120518) [ 0.188664] ACPI: SSDT 000000007a4ffe18 00015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.189816] ACPI: Dynamic OEM Table Load: [ 0.189826] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20120518) [ 0.200143] ACPI: SSDT 000000007a4fef18 00008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 0.201217] ACPI: Dynamic OEM Table Load: [ 0.201228] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20120518) [ 2.715304] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 2.715326] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node ffff880077c458d0), AE_TIME (20131218/psparse-536) [ 2.715370] ACPI: Interpreter enabled [ 2.715391] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) [ 2.715410] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 2.715460] ACPI: (supports S0 S3 S4 S5) [ 2.715467] ACPI: Using IOAPIC for interrupt routing [ 2.715541] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 2.716873] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 2.717197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.717826] ACPI: No dock devices found. [ 2.726777] ACPI: Power Resource [USBC] (on) [ 2.746705] ACPI: Power Resource [PLPE] (on) [ 2.747334] ACPI: Power Resource [PLPE] (on) [ 2.758141] ACPI: Power Resource [CLK0] (on) [ 2.758281] ACPI: Power Resource [CLK1] (on) [ 2.832691] ACPI: Power Resource [FN00] (off) [ 2.834128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.834150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.834293] \_SB_.PCI0:_OSC invalid UUID [ 2.834298] _OSC request data:1 1f 0 [ 2.834310] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 2.835163] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 2.835740] PCI host bridge to bus 0000:00 [ 2.835754] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.835764] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 2.835774] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 2.835782] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 2.835791] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 2.835800] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 2.835809] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 2.835818] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff] [ 2.835827] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe] [ 2.835851] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 2.836099] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 2.836122] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 2.836140] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 2.836157] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057] [ 2.836410] pci 0000:00:11.0: [8086:0f15] type 00 class 0x080501 [ 2.836436] pci 0000:00:11.0: reg 0x10: [mem 0x90900000-0x90900fff] [ 2.836452] pci 0000:00:11.0: reg 0x14: [mem 0x90901000-0x90901fff] [ 2.836534] pci 0000:00:11.0: PME# supported from D0 D3hot [ 2.836741] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501 [ 2.836767] pci 0000:00:12.0: reg 0x10: [mem 0x90819000-0x90819fff] [ 2.836782] pci 0000:00:12.0: reg 0x14: [mem 0x90818000-0x90818fff] [ 2.836865] pci 0000:00:12.0: PME# supported from D0 D3hot [ 2.837069] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 2.837098] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit] [ 2.837175] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.837326] pci 0000:00:14.0: System wakeup disabled by ACPI [ 2.837458] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501 [ 2.837484] pci 0000:00:17.0: reg 0x10: [mem 0x90816000-0x90816fff] [ 2.837500] pci 0000:00:17.0: reg 0x14: [mem 0x90815000-0x90815fff] [ 2.837582] pci 0000:00:17.0: PME# supported from D0 D3hot [ 2.837797] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 2.837827] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff] [ 2.837843] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff] [ 2.837943] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 2.838160] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 2.838193] pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit] [ 2.838283] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.838496] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 2.838581] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.838696] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 2.838821] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 2.838904] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.839014] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 2.839144] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 2.839429] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 2.839472] pci 0000:00:1f.3: reg 0x10: [mem 0x90814000-0x9081401f] [ 2.839569] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f] [ 2.839993] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.840172] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.840198] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff] [ 2.840234] pci 0000:02:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit] [ 2.840258] pci 0000:02:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref] [ 2.840364] pci 0000:02:00.0: supports D1 D2 [ 2.840370] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.840436] pci 0000:02:00.0: System wakeup disabled by ACPI [ 2.847581] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 2.847594] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 2.847602] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] [ 2.847612] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 2.848832] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15), disabled. [ 2.849042] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15), disabled. [ 2.849248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15), disabled. [ 2.849452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15), disabled. [ 2.849658] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7, disabled. [ 2.849863] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9, disabled. [ 2.850077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15), disabled. [ 2.850283] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15), disabled. [ 2.852769] ACPI: Enabled 5 GPEs in block 00 to 3F [ 2.852898] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 2.853265] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.853287] vgaarb: loaded [ 2.853293] vgaarb: bridge control possible 0000:00:02.0 [ 2.853519] PCI: Using ACPI for IRQ routing [ 2.855295] PCI: pci_cache_line_size set to 64 bytes [ 2.855317] pci 0000:00:11.0: no compatible bridge window for [mem 0x90900000-0x90900fff] [ 2.855330] pci 0000:00:11.0: no compatible bridge window for [mem 0x90901000-0x90901fff] [ 2.855384] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 2.855390] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 2.855395] e820: reserve RAM buffer [mem 0x79c03000-0x7bffffff] [ 2.855399] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 2.855735] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.855752] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.857804] Switched to clocksource hpet [ 2.863232] pnp: PnP ACPI init [ 2.863290] ACPI: bus type PNP registered [ 2.863429] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.863625] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.863967] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 2.864041] pnp 00:03: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff] [ 2.864139] system 00:03: [io 0x0680-0x069f] has been reserved [ 2.864151] system 00:03: [io 0x0400-0x047f] has been reserved [ 2.864160] system 00:03: [io 0x0500-0x05fe] has been reserved [ 2.864170] system 00:03: [io 0x0600-0x061f] has been reserved [ 2.864181] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.864471] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.865355] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved [ 2.865370] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved [ 2.865381] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved [ 2.865390] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved [ 2.865400] system 00:05: [mem 0xfed0c000-0xfed0ffff] could not be reserved [ 2.865410] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 2.865420] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 2.865430] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 2.865439] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved [ 2.865451] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.867736] pnp 00:06: Plug and Play ACPI device, IDs INT33bd (active) [ 2.867822] pnp: PnP ACPI: found 7 devices [ 2.867832] ACPI: bus type PNP unregistered [ 2.878010] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 2.878023] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 2.878031] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 2.878056] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 2.878063] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 2.878069] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 2.878084] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90c00000-0x90dfffff] [ 2.878105] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90e00000-0x90ffffff 64bit pref] [ 2.878119] pci 0000:00:11.0: BAR 0: assigned [mem 0x90817000-0x90817fff] [ 2.878136] pci 0000:00:11.0: BAR 1: assigned [mem 0x9081a000-0x9081afff] [ 2.878152] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 2.878163] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 2.878172] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.878184] pci 0000:00:1c.0: bridge window [mem 0x90c00000-0x90dfffff] [ 2.878195] pci 0000:00:1c.0: bridge window [mem 0x90e00000-0x90ffffff 64bit pref] [ 2.878210] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 2.878219] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 2.878230] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] [ 2.878241] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 2.878256] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 2.878261] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 2.878267] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 2.878272] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 2.878278] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 2.878284] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 2.878289] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff] [ 2.878295] pci_bus 0000:00: resource 11 [mem 0x80000000-0x908ffffe] [ 2.878301] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 2.878307] pci_bus 0000:01: resource 1 [mem 0x90c00000-0x90dfffff] [ 2.878313] pci_bus 0000:01: resource 2 [mem 0x90e00000-0x90ffffff 64bit pref] [ 2.878319] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 2.878324] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff] [ 2.878330] pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref] [ 2.878434] NET: Registered protocol family 2 [ 2.878841] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.878962] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 2.879087] TCP: Hash tables configured (established 16384 bind 16384) [ 2.879166] TCP: reno registered [ 2.879194] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 2.879231] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 2.879447] NET: Registered protocol family 1 [ 2.879491] pci 0000:00:02.0: Boot video device [ 2.879977] PCI: CLS 64 bytes, default 64 [ 2.880108] Unpacking initramfs... [ 3.474431] Freeing initrd memory: 13244K (ffff880036612000 - ffff880037301000) [ 3.474870] microcode: CPU0 sig=0x30673, pf=0x1, revision=0x321 [ 3.474893] microcode: CPU1 sig=0x30673, pf=0x1, revision=0x321 [ 3.475027] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 3.475836] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 3.475979] audit: initializing netlink subsys (disabled) [ 3.476028] audit: type=2000 audit(1408641859.464:1): initialized [ 3.503856] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.504274] VFS: Disk quotas dquot_6.5.2 [ 3.504339] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.504512] msgmni has been set to 3833 [ 3.505168] alg: No test for stdrng (krng) [ 3.505240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 3.505332] io scheduler noop registered [ 3.505341] io scheduler deadline registered [ 3.505374] io scheduler cfq registered (default) [ 3.506120] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.506180] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 3.506359] simple-framebuffer simple-framebuffer.0: framebuffer at 0x80000000, 0x408000 bytes, mapped to 0xffffc90004400000 [ 3.506374] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5504 [ 3.516805] Console: switching to colour frame buffer device 170x48 [ 3.527005] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 3.527138] intel_idle: does not run on family 6 model 55 [ 3.527239] GHES: HEST is not enabled! [ 3.527456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.547752] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.548858] Linux agpgart interface v0.103 [ 3.549181] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 4.577591] i8042: No controller found [ 4.577714] tsc: Refined TSC clocksource calibration: 1333.333 MHz [ 4.578042] mousedev: PS/2 mouse device common for all mice [ 4.578228] rtc_cmos 00:00: RTC can wake from S4 [ 4.578519] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 4.578660] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.578805] Intel P-state driver initializing. [ 4.578901] Intel pstate controlling: cpu 0 [ 4.579172] Intel pstate controlling: cpu 1 [ 4.579542] AMD IOMMUv2 driver by Joerg Roedel <[email protected]> [ 4.579797] AMD IOMMUv2 functionality not available on this system [ 4.580619] TCP: cubic registered [ 4.580894] NET: Registered protocol family 10 [ 4.582253] mip6: Mobile IPv6 [ 4.582396] NET: Registered protocol family 17 [ 4.582589] mpls_gso: MPLS GSO support [ 4.584283] registered taskstats version 1 [ 4.591939] rtc_cmos 00:00: setting system clock to 2014-08-21 17:24:21 UTC (1408641861) [ 4.598935] PM: Hibernation image not present or could not be loaded. [ 4.602371] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000) [ 4.608188] Write protecting the kernel read-only data: 8192k [ 4.623772] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000) [ 4.630681] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000) [ 4.665177] systemd-udevd[57]: starting version 208 [ 4.669525] random: systemd-udevd urandom read with 2 bits of entropy available [ 4.696162] sdhci: Secure Digital Host Controller Interface driver [ 4.699711] sdhci: Copyright(c) Pierre Ossman [ 4.715682] sdhci-pci 0000:00:11.0: SDHCI controller found [8086:0f15] (rev c) [ 4.724741] hidraw: raw HID events driver (C) Jiri Kosina [ 4.734023] mmc0: SDHCI controller on PCI [0000:00:11.0] using ADMA [ 4.739133] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev c) [ 4.746852] mmc1: SDHCI controller on PCI [0000:00:12.0] using ADMA [ 4.751757] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev c) [ 4.760533] mmc2: SDHCI controller on PCI [0000:00:17.0] using ADMA [ 4.766032] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.769760] ACPI: Thermal Zone [TZ01] (27 C) [ 4.774304] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.779732] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.796684] ACPI: bus type USB registered [ 4.805713] ACPI: Fan [FAN0] (off) [ 4.812790] r8169 0000:02:00.0: irq 103 for MSI/MSI-X [ 4.813283] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000034a000, 00:13:20:fe:30:d7, XID 0c000880 IRQ 103 [ 4.816975] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 4.822191] usbcore: registered new interface driver usbfs [ 4.838443] usbcore: registered new interface driver hub [ 4.843416] usbcore: registered new device driver usb [ 4.855443] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.862044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.867168] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 4.867221] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 4.867396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.870931] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.874430] usb usb1: Product: xHCI Host Controller [ 4.877912] usb usb1: Manufacturer: Linux 3.14-2-amd64 xhci_hcd [ 4.881393] usb usb1: SerialNumber: 0000:00:14.0 [ 4.885441] hub 1-0:1.0: USB hub found [ 4.889301] hub 1-0:1.0: 6 ports detected [ 4.900676] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.909173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.918066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.926743] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.935419] usb usb2: Product: xHCI Host Controller [ 4.944024] usb usb2: Manufacturer: Linux 3.14-2-amd64 xhci_hcd [ 4.952713] usb usb2: SerialNumber: 0000:00:14.0 [ 4.962599] hub 2-0:1.0: USB hub found [ 4.971311] hub 2-0:1.0: 1 port detected [ 5.169770] mmc1: new high speed SDHC card at address 0001 [ 5.182654] mmcblk0: mmc1:0001 00000 7.41 GiB [ 5.206142] mmcblk0: p1 p2 [ 5.215614] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 5.407005] usb 1-1: New USB device found, idVendor=0424, idProduct=2517 [ 5.417681] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.431446] hub 1-1:1.0: USB hub found [ 5.442182] hub 1-1:1.0: 7 ports detected [ 5.577724] Switched to clocksource tsc [ 5.625496] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 5.762354] usb 1-2: New USB device found, idVendor=0d8c, idProduct=000c [ 5.762362] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.762367] usb 1-2: Product: C-Media USB Headphone Set [ 5.770625] usbcore: registered new interface driver usbhid [ 5.770629] usbhid: USB HID core driver [ 5.782402] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:0D8C:000C.0001/input/input0 [ 5.789934] hid-generic 0003:0D8C:000C.0001: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:14.0-2/input3 [ 5.853792] usb 1-1.1: new full-speed USB device number 4 using xhci_hcd [ 5.902114] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.947907] usb 1-1.1: New USB device found, idVendor=22b8, idProduct=0938 [ 5.951509] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.955234] usb 1-1.1: Product: Motorola HD Dock [ 5.958958] usb 1-1.1: Manufacturer: Motorola Mobility [ 5.962679] usb 1-1.1: SerialNumber: 4ED4904626000500 [ 5.966698] usb 1-1.1: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes [ 5.970490] usb 1-1.1: ep 0x1 - rounding interval to 512 microframes, ep desc says 800 microframes [ 5.981582] input: Motorola Mobility Motorola HD Dock as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:22B8:0938.0002/input/input1 [ 5.991989] hid-generic 0003:22B8:0938.0002: input,hidraw1: USB HID v1.01 Keyboard [Motorola Mobility Motorola HD Dock] on usb-0000:00:14.0-1.1/input0 [ 6.070045] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd [ 6.193241] usb 1-1.3: New USB device found, idVendor=22b8, idProduct=093a [ 6.203745] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.214214] usb 1-1.3: Product: Motorola USB keyboard [gb basic] [ 6.224714] usb 1-1.3: Manufacturer: Motorola USB keyboard [gb basic] [ 6.235687] usb 1-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.246341] usb 1-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.264630] input: Motorola USB keyboard [gb basic] Motorola USB keyboard [gb basic] as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:22B8:093A.0003/input/input2 [ 6.286795] hid-generic 0003:22B8:093A.0003: input,hidraw2: USB HID v1.10 Keyboard [Motorola USB keyboard [gb basic] Motorola USB keyboard [gb basic]] on usb-0000:00:14.0-1.3/input0 [ 6.319210] input: Motorola USB keyboard [gb basic] Motorola USB keyboard [gb basic] as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:22B8:093A.0004/input/input3 [ 6.344581] hid-generic 0003:22B8:093A.0004: input,hidraw3: USB HID v1.10 Mouse [Motorola USB keyboard [gb basic] Motorola USB keyboard [gb basic]] on usb-0000:00:14.0-1.3/input1 [ 6.442599] usb 1-1.6: new low-speed USB device number 6 using xhci_hcd [ 6.564623] usb 1-1.6: New USB device found, idVendor=054c, idProduct=0061 [ 6.577655] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.590687] usb 1-1.6: Product: SCE USB MOUSE [ 6.603618] usb 1-1.6: Manufacturer: Sony Computer Entertainment Inc. [ 6.617090] usb 1-1.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.634084] input: Sony Computer Entertainment Inc. SCE USB MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:054C:0061.0005/input/input4 [ 6.648346] hid-generic 0003:054C:0061.0005: input,hidraw4: USB HID v1.00 Mouse [Sony Computer Entertainment Inc. SCE USB MOUSE] on usb-0000:00:14.0-1.6/input0 [ 6.734982] usb 1-1.7: new high-speed USB device number 7 using xhci_hcd [ 6.845000] usb 1-1.7: New USB device found, idVendor=148f, idProduct=5370 [ 6.859103] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.873149] usb 1-1.7: Product: 802.11 n WLAN [ 6.887102] usb 1-1.7: Manufacturer: Ralink [ 6.901025] usb 1-1.7: SerialNumber: 1.0 [ 7.494798] systemd-udevd[240]: starting version 208 [ 7.804160] random: nonblocking pool is initialized [ 8.002477] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 8.015317] Monitor-Mwait will be used to enter C-1 state [ 8.015337] Monitor-Mwait will be used to enter C-2 state [ 8.015364] ACPI: acpi_idle registered with cpuidle [ 8.103959] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.185578] [drm] Initialized drm 1.1.0 20060810 [ 8.214240] snd_hda_intel 0000:00:1b.0: irq 105 for MSI/MSI-X [ 8.426622] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258) [ 8.437911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.532777] usbcore: registered new interface driver snd-usb-audio [ 8.638146] EFI Variables Facility v0.08 2004-May-17 [ 8.657235] pstore: Registered efi as persistent store backend [ 8.683286] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 8.777395] cfg80211: Calling CRDA to update world regulatory domain [ 8.952574] SSE version of gcm_enc/dec engaged. [ 8.973291] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 9.012499] alg: No test for crc32 (crc32-pclmul) [ 9.026476] usb 1-1.7: reset high-speed USB device number 7 using xhci_hcd [ 9.040777] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. [ 9.138084] usb 1-1.7: reset high-speed USB device number 7 using xhci_hcd [ 9.143680] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. [ 9.234202] usb 1-1.7: reset high-speed USB device number 7 using xhci_hcd [ 9.265305] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eee40 [ 9.270863] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eee00 [ 9.276192] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eee80 [ 9.281334] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eeec0 [ 9.286293] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eef00 [ 9.291055] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eef40 [ 9.295626] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800749eef80 [ 9.300543] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 9.314239] intel_rapl: domain package energy ctr 0:0 not working, skip [ 9.321663] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 9.351360] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.352111] usbcore: registered new interface driver rt2800usb [ 9.430501] intel_rapl: domain core energy ctr 0:0 not working, skip [ 9.434878] intel_rapl: no valid rapl domains found in package 0 [ 9.570566] intel_rapl: domain package energy ctr 0:0 not working, skip [ 9.683065] intel_rapl: domain core energy ctr 0:0 not working, skip [ 9.687393] intel_rapl: no valid rapl domains found in package 0 [ 13.031195] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 13.035406] ACPI Error: Method parse/execution failed [\_SB_.LID0._LID] (Node ffff880077c45678), AE_TIME (20131218/psparse-536) [ 13.039602] ACPI: Lid Switch [LID0] [ 13.039820] ACPI: Battery Slot [BAT0] (battery absent) [ 13.047943] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7 [ 13.052421] ACPI: Power Button [PWRB] [ 13.056728] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8 [ 13.061494] ACPI: Sleep Button [SLPB] [ 13.065941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9 [ 13.070662] ACPI: Power Button [PWRF] [ 13.177496] [drm] Memory usable by graphics device = 2048M [ 13.181774] checking generic (80000000 408000) vs hw (80000000 10000000) [ 13.181780] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver [ 13.186116] Console: switching to colour dummy device 80x25 [ 33.065231] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 33.065270] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff880077c45998), AE_TIME (20131218/psparse-536) [ 33.065314] ACPI Exception: AE_TIME, Evaluating _BIX (20131218/battery-444) [ 33.065903] ACPI: AC Adapter [ADP1] (off-line) [ 33.077504] i915 0000:00:02.0: irq 106 for MSI/MSI-X [ 33.077573] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 33.077596] [drm] Driver supports precise vblank timestamp query. [ 33.077910] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 33.225679] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 33.327837] fbcon: inteldrmfb (fb0) is primary device [ 33.766676] Console: switching to colour frame buffer device 170x48 [ 33.792614] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 33.792856] i915 0000:00:02.0: registered panic notifier [ 34.855859] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 53.115322] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 53.115515] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff880077c45998), AE_TIME (20131218/psparse-536) [ 53.115761] ACPI Exception: AE_TIME, Evaluating _BIX (20131218/battery-444) [ 53.118471] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 53.119850] acpi device:30: registered as cooling_device3 [ 53.120136] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 53.120497] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 73.165382] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 73.165567] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff880077c45998), AE_TIME (20131218/psparse-536) [ 73.165811] ACPI Exception: AE_TIME, Evaluating _BIX (20131218/battery-444) [ 93.215463] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 93.215648] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff880077c45998), AE_TIME (20131218/psparse-536) [ 93.215892] ACPI Exception: AE_TIME, Evaluating _BIX (20131218/battery-444) [ 113.265554] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20131218/evregion-282) [ 113.265734] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC.BAT1._BIX] (Node ffff880077c45998), AE_TIME (20131218/psparse-536) [ 113.265980] ACPI Exception: AE_TIME, Evaluating _BIX (20131218/battery-444) [ 114.194278] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 114.507442] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 115.660907] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 115.698187] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 117.005934] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2) [ 117.017448] r8169 0000:02:00.0: Direct firmware load failed with error -2 [ 117.028874] r8169 0000:02:00.0: Falling back to user helper [ 117.071005] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2) [ 117.092454] r8169 0000:02:00.0 eth0: link down [ 117.100874] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 117.234940] RPC: Registered named UNIX socket transport module. [ 117.246129] RPC: Registered udp transport module. [ 117.257184] RPC: Registered tcp transport module. [ 117.268072] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 117.302792] FS-Cache: Loaded [ 117.378990] FS-Cache: Netfs 'nfs' registered for caching [ 117.470067] Installing knfsd (copyright (C) 1996 [email protected]). [ 130.306254] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 130.308404] rt2800usb 1-1.7:1.0: firmware: direct-loading firmware rt2870.bin [ 130.308567] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 130.490892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 138.006018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 138.316276] r8169 0000:02:00.0 eth0: link down [ 138.316679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 138.709508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 140.763028] wlan0: authenticate with c0:c1:c0:75:0e:da [ 140.782108] wlan0: send auth to c0:c1:c0:75:0e:da (try 1/3) [ 140.785609] wlan0: authenticated [ 140.789256] wlan0: associate with c0:c1:c0:75:0e:da (try 1/3) [ 140.792757] wlan0: RX AssocResp from c0:c1:c0:75:0e:da (capab=0x401 status=0 aid=6) [ 140.799008] wlan0: associated [ 140.799260] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 140.800599] wlan0: deauthenticating from c0:c1:c0:75:0e:da by local choice (reason=3) [ 140.833344] cfg80211: Calling CRDA to update world regulatory domain [ 207.972757] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 208.279282] r8169 0000:02:00.0 eth0: link down [ 208.279679] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 209.485863] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 209.951581] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 210.285876] r8169 0000:02:00.0 eth0: link down [ 210.286278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 211.559165] wlan0: authenticate with c0:c1:c0:75:0e:da [ 211.576773] wlan0: send auth to c0:c1:c0:75:0e:da (try 1/3) [ 211.581558] wlan0: authenticated [ 211.585600] wlan0: associate with c0:c1:c0:75:0e:da (try 1/3) [ 211.588806] wlan0: RX AssocResp from c0:c1:c0:75:0e:da (capab=0x401 status=0 aid=6) [ 211.594378] wlan0: associated [ 211.594622] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
_______________________________________________ elinux-MinnowBoard mailing list [email protected] http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
