Hi, try to follow following howto: http://mcentral.de/wiki/index.php/USBVideo#Get_usbsnoop_for_windows
and upload or send me a parsed usbsnoop logfile. This device is quite new. You might also try firmware_v4.tgz since this one is used with the Pinnacle HD Pro Stick Markus On 5/23/07, Brian King <[EMAIL PROTECTED]> wrote: > Hi, > > I've tried the kworld device with the new changes to the repo. > > It doesn't work, but below is the output of the testing. Hopefully it will > give some insight if this device can be reasonably supported? > Please let me know what I can do to help. > > Thanks for your help, > bk > > # modprobe em28xx > (using firmware_v3.tgz) > > May 22 22:22:42 localhost kernel: [92006.381930] Linux video capture > interface: v2.00 > May 22 22:22:42 localhost kernel: [92006.391451] em28xx v4l2 driver version > 0.0.1 loaded > May 22 22:22:42 localhost kernel: [92006.391596] usbcore: registered new > interface driver em28xx > > (insert usb stick) > > May 22 22:23:06 localhost kernel: [92029.868351] usb 2-4: new high speed USB > device using ehci_hcd and address 9 > May 22 22:23:06 localhost kernel: [92030.003633] usb 2-4: configuration #1 > chosen from 1 choice > May 22 22:23:06 localhost kernel: [92030.015970] em28xx: device is attached > to a USB 2.0 bus > May 22 22:23:06 localhost kernel: [92030.015972] em28xx: you're using the > experimental/unstable tree from mcentral.de > May 22 22:23:06 localhost kernel: [92030.015974] em28xx: there's also a > stable tree available but which is limited to > May 22 22:23:06 localhost kernel: [92030.015975] em28xx: linux <=2.6.19.2 > May 22 22:23:06 localhost kernel: [92030.015977] em28xx: it's fine to use > this driver but keep in mind that it will move > May 22 22:23:06 localhost kernel: [92030.015979] em28xx: to > http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > May 22 22:23:06 localhost kernel: [92030.015980] em28xx: proved to be stable > May 22 22:23:06 localhost kernel: [92030.015988] em28xx #0: Alternate > settings: 8 > May 22 22:23:06 localhost kernel: [92030.015990] em28xx #0: Alternate > setting 0, max size= 0 > May 22 22:23:06 localhost kernel: [92030.015992] em28xx #0: Alternate > setting 1, max size= 0 > May 22 22:23:06 localhost kernel: [92030.015994] em28xx #0: Alternate > setting 2, max size= 1448 > May 22 22:23:06 localhost kernel: [92030.015996] em28xx #0: Alternate > setting 3, max size= 2048 > May 22 22:23:06 localhost kernel: [92030.015998] em28xx #0: Alternate > setting 4, max size= 2304 > May 22 22:23:06 localhost kernel: [92030.015999] em28xx #0: Alternate > setting 5, max size= 2580 > May 22 22:23:06 localhost kernel: [92030.016001] em28xx #0: Alternate > setting 6, max size= 2892 > May 22 22:23:06 localhost kernel: [92030.016003] em28xx #0: Alternate > setting 7, max size= 3072 > May 22 22:23:06 localhost kernel: [92030.373286] tuner 5-0061: chip found @ > 0xc2 (em28xx #0) > May 22 22:23:06 localhost kernel: [92030.373336] attach inform (default): > detected I2C address c2 > May 22 22:23:06 localhost kernel: [92030.373340] > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback > May 22 22:23:06 localhost kernel: [92030.373342] tuner 0x61: Configuration > acknowledged > May 22 22:23:06 localhost kernel: [92030.373344] > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback > May 22 22:23:06 localhost kernel: [92030.373430] > /lib/firmware/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > May 22 22:23:06 localhost kernel: [92030.373433] > /lib/firmware/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner > successfully loaded > May 22 22:23:06 localhost kernel: [92030.377922] attach_inform: tvp5150 > detected. > May 22 22:23:06 localhost kernel: [92030.379049] attach_inform: eeprom > detected. > May 22 22:23:07 localhost kernel: [92030.403733] em28xx #0: i2c eeprom 00: > 1a eb 67 95 1a eb 16 a3 d0 13 5c 03 6a 22 00 00 > May 22 22:23:07 localhost kernel: [92030.403742] em28xx #0: i2c eeprom 10: > 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403747] em28xx #0: i2c eeprom 20: > 4e 00 01 00 f0 10 01 00 b8 00 00 00 5b 32 00 00 > May 22 22:23:07 localhost kernel: [92030.403752] em28xx #0: i2c eeprom 30: > 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403758] em28xx #0: i2c eeprom 40: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403763] em28xx #0: i2c eeprom 50: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403767] em28xx #0: i2c eeprom 60: > 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 > May 22 22:23:07 localhost kernel: [92030.403772] em28xx #0: i2c eeprom 70: > 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00 > May 22 22:23:07 localhost kernel: [92030.403778] em28xx #0: i2c eeprom 80: > 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403783] em28xx #0: i2c eeprom 90: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403788] em28xx #0: i2c eeprom a0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403793] em28xx #0: i2c eeprom b0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403798] em28xx #0: i2c eeprom c0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403802] em28xx #0: i2c eeprom d0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403807] em28xx #0: i2c eeprom e0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403812] em28xx #0: i2c eeprom f0: > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > May 22 22:23:07 localhost kernel: [92030.403817] EEPROM ID= 0x9567eb1a > May 22 22:23:07 localhost kernel: [92030.403819] Vendor/Product ID= > eb1a:a316 > May 22 22:23:07 localhost kernel: [92030.403820] AC97 audio (5 sample rates) > May 22 22:23:07 localhost kernel: [92030.403822] 500mA max power > May 22 22:23:07 localhost kernel: [92030.403823] Table at 0x04, > strings=0x226a, 0x0000, 0x0000 > May 22 22:23:07 localhost kernel: [92030.403826] tveeprom 5-0050: > Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. > May 22 22:23:07 localhost kernel: [92030.467755] tvp5150 5-005c: tvp5150am1 > detected. > May 22 22:23:07 localhost kernel: [92030.556609] Loading base firmware: > xc3028_init0.i2c.fw > May 22 22:23:08 localhost kernel: [92031.444541] Loading default analogue TV > settings: xc3028_BG_PAL_A2_A.i2c.fw > May 22 22:23:08 localhost kernel: [92031.467117] xc3028-tuner.c: firmware > 2.7 > May 22 22:23:08 localhost kernel: [92031.467123] ANALOG TV REQUEST > May 22 22:23:08 localhost kernel: [92031.473231] em28xx #0: V4L2 device > registered as /dev/video0 > May 22 22:23:08 localhost kernel: [92031.473236] em28xx #0: Found Kworld > PlusTV HD Hybrid 330 > May 22 22:23:08 localhost kernel: [92031.510852] em28xx-audio.c: probing for > em28x1 non standard usbaudio > May 22 22:23:08 localhost kernel: [92031.510857] em28xx-audio.c: Copyright > (C) 2006 Markus Rechberger > May 22 22:23:08 localhost kernel: [92031.511081] Em28xx: Initialized (Em28xx > Audio Extension) extension > May 22 22:23:08 localhost kernel: [92031.565069] em2880-dvb.c: DVB Init > May 22 22:23:08 localhost kernel: [92031.565082] Loading base firmware: > xc3028_8MHz_init0.i2c.fw > May 22 22:23:09 localhost kernel: [92032.655301] Loading default dtv > settings: xc3028_DTV8_2633.i2c.fw > May 22 22:23:09 localhost kernel: [92032.674385] xc3028-tuner.c: firmware > 2.7 > May 22 22:23:09 localhost kernel: [92032.674392] Sending extra call for > Digital TV! > May 22 22:23:09 localhost kernel: [92032.779978] > FIXME:em28xx_i2c_send_bytes(1c): write failed: > May 22 22:23:09 localhost kernel: [92032.779983] > =============================== > May 22 22:23:09 localhost kernel: [92032.779985] 02 > May 22 22:23:09 localhost kernel: [92032.779988] > ================================ > May 22 22:23:09 localhost kernel: [92032.780334] lgdt330x: > i2c_read_demod_bytes: addr 0x0e select 0x02 error (ret == -19) > May 22 22:23:09 localhost kernel: [92032.780360] em2880-dvb.c: failed > initializing zl10353 DVB-T demodulator > May 22 22:23:09 localhost kernel: [92032.780363] em2880-dvb.c: retrying with > mt352 DVB-T demodulator > May 22 22:23:09 localhost kernel: [92032.780707] > FIXME:em28xx_i2c_send_bytes(1e): write failed: > May 22 22:23:09 localhost kernel: [92032.780710] > =============================== > May 22 22:23:09 localhost kernel: [92032.780712] 7f > May 22 22:23:09 localhost kernel: [92032.780713] > ================================ > May 22 22:23:09 localhost kernel: [92032.781082] mt352_read_register: > readreg error (reg=127, ret==-19) > May 22 22:23:09 localhost kernel: [92032.781105] em2880-dvb.c: no luck with > mt352 demodulator, not attaching em2880-dvb > May 22 22:23:09 localhost kernel: [92032.781108] em2880-dvb.c: DVB-T > demodulator not reachable, did you try "modprobe em28xx device_mode=1" > May 22 22:23:09 localhost kernel: [92032.781112] Em28xx: Initialized (Em2880 > DVB Extension) extension > > # scan -n -o zap -p > /usr/share/doc/dvb-utils/examples/scan/atsc/us-NTSC-center-frequencies-8VSB > > scanning > /usr/share/doc/dvb-utils/examples/scan/atsc/us-NTSC-center-frequencies-8VSB > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such > file or directory > > > On 5/22/07, Markus Rechberger <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > I added the card definition to the repository on mcentral.de. > > > > http://mcentral.de/wiki/index.php/Em2880#Installation > > > > Can you please test it? > > > > thanks, > > Markus > > > > On 5/22/07, Brian King <[EMAIL PROTECTED]> wrote: > > > Hello, > > > > > > Has anyone had any luck getting the kworld plus tv hd hybrid stick 330 > > > device working in linux? > > > > > > The product url is: > > > http://www.kworldcomputer.com/product/digital/atsc330u/atsc330u.htm > > > > > > The device seems to be based on the em2883 chipset. I've tried the > > em28xx > > > device driver (experimental version) and the usb id (eb1a:a316) is not > > > recognized. > > > > > > In the em28xx driver I patched it to recognize the usb driver as either > > a > > > generic em2883 board, or a hauppauge wintv hvr 950, or a pinnacle pctv > > hd > > > pro. Although all 3 use the em2883 chipset, none of them worked > > (panicked > > > the kernel). > > > > > > Any suggestions or further information? I can't find any information in > > the > > > em28xx wiki or devwiki or the linuxtv wiki. > > > > > > TIA, > > > bk > > > > > > > > > -- > > Markus Rechberger > > > -- Markus Rechberger _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx
