Hello, I have a Pinnacle HDTV Pro Stick that I have been able to get working with mcentral v4l-dvb-kernel branch, and a Hauppage PVR-150 that works otherwise. Unfortunately, I can only get one at a time working. After I first installed the v4l-dvb-kernel branch, the ivtv modules would not load, but I tracked that problem down to the PVR-150 firmware being overwritten during the v4l-dvb-kernel install.
I putting in place the correct firmware for the PVR-150, the ivtv modules would load normally at boot, but no device nodes were ever created for the PVR-150. (the nvidia display driver also stopped working at this point - when xorg started the screens would go black and stay that way with no indication as to what was happening in the xorg or system logs that I could find). Caring more about a working PVR-150 than a working HDTV pro stick, I have since reinstalled v4l-dvb from the main linuxtv.org repository, and the PVR-150 is now functioning properly again. The em28xx modules are still being loaded, but no device node is being created for the pro stick (not that I would expect it to work now). To make matters worse, the sound card devices are no longer being created, either, so I have no sound. I don't have access to the logs at the moment, but I no that I am not the first person to have this problem and I was just wondering if there is a published solution out there that has elluded my searches. Thanks, Chris -- TV/IT Engineer WCJB-TV Gainesville, FL (352) 377 2020 x248 [EMAIL PROTECTED]
_______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
