hi em28xx and em2880-dvb support Hauppauge-HVR-900 2040:6502 ? My linux is Ubuntu feisty
my install: http://mcentral.de/hg/~mrec/v4l-dvb-experimental + install http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz on /lib/firmware/$(uname -r) and emBDA.sys on my cd driver win ./convert emBDA.sys > /lib/firmware/$(uname -r)/xceive_xc_3028.fw sudo modprobe em28xx sudo modprobe em2880-dvb result: analog img perfect ok :) from france/secam with xawtv4 analog audio :( no audio with xawtv4 tnt img :( /dev/dvb not exist... tnt audio :( /dev/dvb not exist... if possible analog and tnt ok from france ? sorry sorry sorry, my msg is short but i'm french and my english is bad :( frafa ____________________________________________________________________________________ ~$ cat /proc/version Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 ~$ gcc -v Utilisation des specs internes. libraries: i486-linux-gnu Configuré avec: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu Modèle de thread: posix version gcc 4.1.2 (Ubuntu 4.1.2-0ubuntu4) ~$ asoundconf list Names of available sound cards: ICH6 Modem 2 [Em28xx Audio ]: Empia Em28xx AudEm28xx Audio - Em28xx Audio Headset dmesg [ 3693.548000] em28xx v4l2 driver version 0.0.1 loaded [ 3693.548000] usbcore: registered new interface driver em28xx [ 3695.692000] Em28xx: Initialized (Em2880 DVB Extension) extension [ 3698.460000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3702.624000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3706.140000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3721.608000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3724.072000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3728.128000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3817.004000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3820.012000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3821.632000] usb 5-1: new high speed USB device using ehci_hcd and address 10 [ 3821.772000] usb 5-1: configuration #1 chosen from 1 choice [ 3821.772000] em28xx new video device (2040:6502): interface 0, class 255 [ 3821.772000] em28xx: device is attached to a USB 2.0 bus [ 3821.772000] em28xx: you're using the experimental/unstable tree from mcentral.de [ 3821.772000] em28xx: there's also a stable tree available but which is limited to [ 3821.772000] em28xx: linux <=2.6.19.2 [ 3821.772000] em28xx: it's fine to use this driver but keep in mind that it will move [ 3821.772000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's [ 3821.772000] em28xx: proved to be stable [ 3821.772000] em28xx #0: Alternate settings: 8 [ 3821.772000] em28xx #0: Alternate setting 0, max size= 0 [ 3821.772000] em28xx #0: Alternate setting 1, max size= 0 [ 3821.772000] em28xx #0: Alternate setting 2, max size= 1448 [ 3821.772000] em28xx #0: Alternate setting 3, max size= 2048 [ 3821.772000] em28xx #0: Alternate setting 4, max size= 2304 [ 3821.772000] em28xx #0: Alternate setting 5, max size= 2580 [ 3821.772000] em28xx #0: Alternate setting 6, max size= 2892 [ 3821.772000] em28xx #0: Alternate setting 7, max size= 3072 [ 3822.128000] attach_inform: eeprom detected. [ 3822.152000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [ 3822.152000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [ 3822.152000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [ 3822.152000] em28xx #0: i2c eeprom 70: 32 00 37 00 35 00 38 00 32 00 30 00 38 00 35 00 [ 3822.152000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [ 3822.152000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [ 3822.152000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 85 06 [ 3822.152000] em28xx #0: i2c eeprom c0: 10 f0 74 02 01 00 01 79 af 00 00 00 00 00 00 00 [ 3822.152000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [ 3822.152000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 85 06 [ 3822.152000] em28xx #0: i2c eeprom f0: 10 f0 74 02 01 00 01 79 af 00 00 00 00 00 00 00 [ 3822.152000] EEPROM ID= 0x9567eb1a [ 3822.152000] Vendor/Product ID= 2040:6502 [ 3822.152000] AC97 audio (5 sample rates) [ 3822.152000] 500mA max power [ 3822.152000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [ 3822.152000] tveeprom 0-0050: Hauppauge model 65018, rev B2C0, serial# 1050245 [ 3822.152000] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type 71) [ 3822.152000] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [ 3822.152000] tveeprom 0-0050: audio processor is None (idx 0) [ 3822.152000] tveeprom 0-0050: has radio [ 3822.152000] setting new tuner type now 71! [ 3822.156000] tuner 0-0061: chip found @ 0xc2 (em28xx #0) [ 3822.156000] attach inform (default): detected I2C address c2 [ 3822.156000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [ 3822.156000] tuner 0x61: Configuration acknowledged [ 3822.156000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback [ 3822.156000] /usr/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! [ 3822.156000] /usr/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded [ 3822.164000] attach_inform: tvp5150 detected. [ 3822.244000] tvp5150 0-005c: tvp5150am1 detected. [ 3822.332000] Loading base firmware: xc3028_init0.i2c.fw [ 3822.824000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3823.424000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw [ 3823.452000] xc3028-tuner.c: firmware 2.7 [ 3823.452000] ANALOG TV REQUEST [ 3823.456000] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 3823.460000] em28xx #0: V4L2 device registered as /dev/video0 [ 3823.460000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2 [ 3823.484000] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 3823.484000] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 3823.488000] Em28xx: Initialized (Em28xx Audio Extension) extension [ 3828.352000] usb 2-1.1: reset low speed USB device using uhci_hcd and address 12 [ 3900.732000] ANALOG TV REQUEST [ 3900.776000] ANALOG TV REQUEST [ 3900.776000] xc3028_tuner_set_params, Loading specific configuration for requested mode xc3028_L_SECAM_NICAM.i2c.fw [ 3903.604000] ANALOG TV REQUEST [EMAIL PROTECTED]:~$ _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
