I've got this hybrid card and dvb-t is working pretty well, but I also wanted to see analog tv with this card. When I launch tvtime it doesn't work, it freezes and I have to kill it. I noticed that dmesg was showing strange messages after I launched tvtime. here they are:
================================ ANALOG TV REQUEST FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 88 ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 09 ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0c ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0a ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0b ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) ANALOG TV REQUEST FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 09 80 ================================ FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0c 80 ================================ FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0a 80 ================================ FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0b 00 ================================ FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 09 ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0c ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== 0a ================================ tvp5150 debug 1-005c: i2c i/o error: rc == -19 (should be 1) FIXME:em28xx_i2c_send_bytes(b8): write failed: =============================== and these messages continue until I kill tvtime. Here's my lsusb: Bus 001 Device 004: ID 0ccd:005e TerraTec Electronic GmbH Bus 001 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 lsmod: Module Size Used by qt1010 8772 0 mt2060 7492 0 mt352 9928 0 zl10353 9160 1 em2880_dvb 15428 0 dvb_core 86576 1 em2880_dvb em28xx_audio 8068 0 xc3028_tuner 11072 2 tvp5150 21520 0 tuner 73640 0 em28xx 101688 2 em2880_dvb,em28xx_audio compat_ioctl32 11008 1 em28xx ir_common 38404 1 em28xx videodev 30144 1 em28xx v4l2_common 20224 5 tvp5150,tuner,em28xx,compat_ioctl32,videodev v4l1_compat 15428 2 em28xx,videodev tveeprom 19856 1 em28xx fuse 47600 2 iwl4965 225060 0 sdhci 18892 0 i2c_i801 10716 0 i2c_core 25280 10 qt1010,mt2060,mt352,zl10353,xc3028_tuner,tvp5150,tuner,em28xx,tveeprom,i2c_i801 mmc_core 29448 1 sdhci uname -a: Linux cybermouse 2.6.22-kamikaze3 #8 SMP PREEMPT Sat Aug 4 16:41:49 CEST 2007 x86_64 Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz GenuineIntel GNU/Linux I'm using gentoo linux, and your experimental sources from mercurial... bye -- Inventore1 - _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
