Hi there, I´m trying to get my IR working on a pinnacle pctv on a debian sid system, with a 2.6.22-2 kernel and the stable em28xx modules from mcentral. Install was done as per wiki instructions. When I just plug the device, it doesnt seem to recognize the ir device. If I unplug the device, load manually ir-kbd-i2c and then plug the device again i get this on dmesg:
em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 1024 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 attach_inform: eeprom detected. em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1c 03 98 20 6a 2e em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00 em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00 em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 20 03 50 00 43 00 54 00 em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 4e 00 em28xx #0: i2c eeprom b0: 54 00 53 00 43 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0c 22 17 39 02 99 4e bc EEPROM ID= 0x9567eb1a Vendor/Product ID= 2304:0208 AC97 audio (5 sample rates) 500mA max power Table at 0x06, strings=0x2098, 0x2e6a, 0x0000 tuner 3-0043: chip found @ 0x86 (em28xx #0) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0063: chip found @ 0xc6 (em28xx #0) attach inform (default): detected I2C address c6 tuner 0x63: Configuration acknowledged tuner 3-0063: type set to 57 (Philips FQ1236A MK4) saa7115 3-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) attach_inform: saa7113 detected. attach_inform: IR detected (). input: i2c IR (EM28XX Pinn as /class/input/input3 ir-kbd-i2c: i2c IR (EM28XX Pinn detected at i2c-3/3-0047/ir0 [em28xx #0] em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Pinnacle PCTV USB 2 em28xx audio device (2304:0208): interface 1, class 1 So it seems that IR was found and attached to event3 as a cat /proc/bus/input/devices show: I: Bus=0018 Vendor=0000 Product=0000 Version=0000 N: Name="i2c IR (EM28XX Pinn" P: Phys=i2c-3/3-0047/ir0 S: Sysfs=/class/input/input3 U: Uniq= H: Handlers=kbd event3 B: EV=100003 B: KEY=c0014 102040 0 0 0 4 8000 180 80000801 9e1680 0 40 2800ffc But cat /dev/input/event3 > /tmp/output and pressing keys on remote just gimme a empty file. input-events 3 also gives nothing. any clues? -- Christian Lyra PoP-PR/RNP _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
