Hi, i have a mysterious problem. I hope you can help me:
I installed the .deb package for Ubuntu. I moved the folder empia to the 2.6.24-17-generic folder, because I not using the -16 kernel anymore. (I red this instruction at another maillinglist. I think it was the Ubuntu bug list...) To support my Terratec t2 I installed the v4l-dvb-kernel, too. So I had to remove the em28xx folder from the v4l drivers to stop a crash with the empia drivers. After a reboot I started the modules with following command: sudo modprobe em28xx card=19 (I have a Prodigy XS) sudo modprobe em28xx-dvb And here is the dmesg: [ 296.517840] usb 2-8: new high speed USB device using ehci_hcd and address 9 [ 296.578010] usb 2-8: configuration #1 chosen from 1 choice [ 296.578058] em28xx new video device (eb1a:2881): interface 0, class 255 [ 296.578061] em28xx: device is attached to a USB 2.0 bus [ 296.578063] em28xx #0: Alternate settings: 8 [ 296.578065] em28xx #0: Alternate setting 0, max size= 0 [ 296.578067] em28xx #0: Alternate setting 1, max size= 0 [ 296.578068] em28xx #0: Alternate setting 2, max size= 1448 [ 296.578070] em28xx #0: Alternate setting 3, max size= 2048 [ 296.578072] em28xx #0: Alternate setting 4, max size= 2304 [ 296.578073] em28xx #0: Alternate setting 5, max size= 2580 [ 296.578075] em28xx #0: Alternate setting 6, max size= 2892 [ 296.578077] em28xx #0: Alternate setting 7, max size= 3072 [ 296.702688] trying to set disabled gpio? (00) [ 296.703122] attach_inform: tvp5150 detected. [ 296.704704] tuner' 2-0061: chip found @ 0xc2 (em28xx #0) [ 296.704730] attach inform (default): detected I2C address c2 [ 296.707086] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [ 296.736046] tvp5150 2-005c: tvp5150am1 detected. [ 297.425387] successfully attached tuner [ 297.428445] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 297.430398] analog tv open() [ 297.430404] modelock active! [ 297.432871] vbi open() [ 297.432877] modelock active! [ 297.436284] em28xx #0: V4L2 device registered as /dev/video0 [ 297.436288] em2880-dvb.c: DVB Init [ 297.572163] em2880-dvb.c: unsupported device [ 297.572167] em28xx #0: Found Terratec Prodigy XS I started Kaffeine but it only show my other DVB-T card( Terratec T²). So i tried to start the analog mode of my card. Tvtime shows me the composite and the s-video interface. So it seems that the analog mode works. But I have no analog TV anymore :-S I hope someone can help me... Florian -- Florian Hülswitt [EMAIL PROTECTED] oder [EMAIL PROTECTED] _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
