Hi Markus, Am Mittwoch, den 04.06.2008, 11:21 +0200 schrieb Markus Rechberger: > Implementing rawvbi in the driver isn't difficult, the problem is > getting applications work with the delivered data. Yes that is clear, we can do the slicer in software. But with the YuY2 data it is also impossible to decode teletext. Did you ever teletext running with the Cinergy? > There are specs available for the cx25843, this one has to be Yes I read this and set the bit 0x404[3] = VBIHACTRAW_EN and 0x424 to 0x434 = 0 in the cx25843. But the YuY2 data does not change to rawvbi.
> configured properly (this is not covered by the em28xx specs anyway, In the em28xx datasheet (from linuxtv) I read that there is a possebility to enable raw vbi data. Because I don't know how is the Cinergy wired I had the hope that this helps. > it's more about reading through those specs - understanding them and > implementing it the right way). > Enabling VBI for the em28xx is just setting a bit of the 0x11 register > and this is already implemented in the em28xx. You mean R11_VINCTRL_REG = 0x51 is slicer off? Which Bit is it exactly? Frank _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
