On Fri, Jul 18, 2008 at 3:49 PM, Gerd Mayer <[EMAIL PROTECTED]> wrote: > Hi, > > I am using gentoo 2.6.25. > I installed v4l-dvb from "http://linuxtv.org/hg/v4l-dvb"; > Then I installed the em28xx-new from "hg clone > http://mcentral.de/hg/~mrec/em28xx-new"; and do a reboot. > After the restart I pulled in my HVR 900 B2C0, but it didn't work. > > dmesg says: > > [ 106.389837] usb 2-1: new high speed USB device using ehci_hcd and address 3 > [ 106.509124] usb 2-1: configuration #1 chosen from 1 choice > [ 106.399716] em28xx v4l2 driver version 0.0.1 loaded > [ 106.400268] em28xx new video device (2040:6502): interface 0, class 255 > [ 106.400271] em28xx: device is attached to a USB 2.0 bus > [ 106.400294] em28xx #0: Alternate settings: 8 > [ 106.400327] em28xx #0: Alternate setting 0, max size= 0 > [ 106.400329] em28xx #0: Alternate setting 1, max size= 0 > [ 106.400331] em28xx #0: Alternate setting 2, max size= 1448 > [ 106.400333] em28xx #0: Alternate setting 3, max size= 2048 > [ 106.400334] em28xx #0: Alternate setting 4, max size= 2304 > [ 106.400336] em28xx #0: Alternate setting 5, max size= 2580 > [ 106.400338] em28xx #0: Alternate setting 6, max size= 2892 > [ 106.400341] em28xx #0: Alternate setting 7, max size= 3072 > [ 107.073839] tuner' 5-0061: chip found @ 0xc2 (em28xx #0) > [ 107.073877] em28xx-i2c: using internal tuner, denying request to i2c tuner > module. > [ 107.080109] attach_inform: eeprom detected. > [ 107.106746] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 > 82 1e 6a 18 > [ 107.106772] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 > 00 00 00 00 > [ 107.106798] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 > 5b e0 00 00 > [ 107.106824] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 > 00 00 00 00 > [ 107.106849] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 107.106874] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 107.106899] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 > 34 00 30 00 > [ 107.106924] em28xx #0: i2c eeprom 70: 32 00 37 00 32 00 32 00 33 00 34 00 > 35 00 38 00 > [ 107.106949] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 > 56 00 20 00 > [ 107.106974] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 > 30 00 00 00 > [ 107.106999] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa > fd d0 28 89 > [ 107.107025] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 > 00 40 a2 8d > [ 107.107050] em28xx #0: i2c eeprom c0: 0a f0 74 02 01 00 01 79 11 00 00 00 > 00 00 00 00 > [ 107.107075] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa > fd d0 28 89 > [ 107.107101] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 > 00 40 a2 8d > [ 107.107126] em28xx #0: i2c eeprom f0: 0a f0 74 02 01 00 01 79 11 00 00 00 > 00 00 00 00 > [ 107.107151] EEPROM ID= 0x9567eb1a > [ 107.107154] Vendor/Product ID= 2040:6502 > [ 107.107157] AC97 audio (5 sample rates) > [ 107.107159] 500mA max power > [ 107.107163] Table at 0x24, strings = 0x1e82, 0x186a, 0x0000 > [ 107.110890] attach_inform: tvp5150 detected. > [ 107.156115] tvp5150 5-005c: tvp5150am1 detected. > [ 108.684222] successfully attached tuner > [ 108.688297] videodev: "em28xx#0 video" has no release callback. Please fix > your driver for proper sysfs support, see http://lwn.net/Articles/36850/ > [ 108.688518] videodev: "em28xx#0 vbi" has no release callback. Please fix > your driver for proper sysfs support, see http://lwn.net/Articles/36850/ > [ 108.688524] em28xx #0: V4L2 VBI device registered as /dev/vbi1 > [ 108.701845] em28xx #0: V4L2 device registered as /dev/video1 > [ 108.701938] input: em2880/em2870 remote control as /class/input/input6 > [ 108.577527] em28xx-input.c: remote control handler attached > [ 108.577533] em28xx #0: Found Hauppauge WinTV HVR (B2C0) > [ 108.577654] usbcore: registered new interface driver em28xx > [ 108.746725] em28xx-audio.c: probing for em28x1 non standard usbaudio > [ 108.746729] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > [ 108.746995] Em28xx: Initialized (Em28xx Audio Extension) extension > [ 108.751373] em2880-dvb.c: DVB Init > [ 110.337684] BUG: unable to handle kernel NULL pointer dereference at > 0000000000000001 > [ 110.337690] IP: [<ffffffff889f523e>] > :dvb_core:dvb_register_adapter+0x2d/0xf7 > [ 110.337702] PGD 15fca8067 PUD 15fca7067 PMD 0 > [ 110.337706] Oops: 0000 [1] SMP > [ 110.337708] CPU 0 > [ 110.337710] Modules linked in: drx3973d em28xx_dvb(+) dvb_core > em28xx_audio xc3028_tuner tvp5150 em28xx snd_seq_midi snd_emu10k1_synth > snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_seq_dummy snd_seq_oss > snd_seq_midi_event snd_seq ipv6 coretemp w83627ehf hwmon_vid eeprom > aes_x86_64 aes_generic sha256_generic tuner_simple tuner_types tuner tvaudio > snd_emu10k1 bttv snd_rawmidi ir_common snd_ac97_codec compat_ioctl32 videodev > ac97_bus snd_seq_device v4l1_compat snd_util_mem i2c_algo_bit nvidia(P) > v4l2_common videobuf_dma_sg videobuf_core snd_bt87x snd_hwdep emu10k1_gp > btcx_risc tveeprom gameport intel_agp sky2 i2c_i801 tg3 e1000 sl811_hcd > ohci_hcd uhci_hcd ehci_hcd sx8 imm scsi_wait_scan > [ 110.337761] Pid: 9272, comm: modprobe Tainted: P 2.6.25-gentoo-r6 > #1 > [ 110.337764] RIP: 0010:[<ffffffff889f523e>] [<ffffffff889f523e>] > :dvb_core:dvb_register_adapter+0x2d/0xf7 > [ 110.337773] RSP: 0018:ffff81015c031eb8 EFLAGS: 00010246 > [ 110.337776] RAX: 0000000000000005 RBX: ffff81015fdd3008 RCX: > ffff8101666f2088 > [ 110.337779] RDX: ffff81015c031ea8 RSI: ffffffff88a0a9a2 RDI: > ffffffff88a06ad0 > [ 110.337781] RBP: ffff81015c0712f0 R08: 0000000000000001 R09: > ffff81015c031948 > [ 110.337784] R10: ffff81017e5d2240 R11: ffff81015fdd3380 R12: > 0000000000000000 > [ 110.337786] R13: 0000000000000001 R14: ffffffff88a0a9a2 R15: > ffffffff88a0c780 > [ 110.337790] FS: 00007f17246986f0(0000) GS:ffffffff80a31000(0000) > knlGS:0000000000000000 > [ 110.337793] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > [ 110.337795] CR2: 0000000000000001 CR3: 000000015fc81000 CR4: > 00000000000006e0 > [ 110.337798] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > [ 110.337800] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > 0000000000000400 > [ 110.337803] Process modprobe (pid: 9272, threadinfo ffff81015c030000, task > ffff81015ff227f0) > [ 110.337806] Stack: ffff8101666f2088 ffff81015fdd3008 ffff81015c071000 > ffff81016b0f3000 > [ 110.337811] ffff81015c0712f0 0000000000000000 0000000000608178 > ffffffff88a09b07 > [ 110.337815] 0000000000000000 0000000100000000 ffff81016b0f3000 > ffff81016b0f3030 > [ 110.337819] Call Trace: > [ 110.337827] [<ffffffff88a09b07>] ? :em28xx_dvb:em2880_dvb_init+0x5e5/0x6ff > [ 110.337841] [<ffffffff8899b26a>] ? > :em28xx:em28xx_register_extension+0x77/0xc1 > [ 110.337858] [<ffffffff8024d37f>] ? sys_init_module+0x9b/0x195 > [ 110.337862] [<ffffffff8020ae4b>] ? system_call_after_swapgs+0x7b/0x80 > [ 110.337866] > > Any ideas ? >
haven't tested 2.6.25 or 2.6.26 with it yet most development has been done with 2.6.23.1, Barry Bouwsma sent me some patches for 2.6.26 (might be important for 2.6.25 too) they'll be pushed on monday when I get internet in my new apartment. Markus _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
