On Tue, Jul 22, 2008 at 10:13 AM, Gerd Mayer <[EMAIL PROTECTED]> wrote: > Hello, > > I've gentoo with kernel 2.6.26. > I do hg clone http://mcentral.de/hg/~mrec/em28xx-new, make, make install > reboot, plug in my HVR900-B2C0 > > the modules are loaded automatically, device /dev/dvb is present, > kaffeine starts, shows a black screen and reports: > "Not able to lock to the signal on the given frequency ". > > I am not sure how to install the em28xx-new ? > Is the installation from http://mcentral.de/hg/~mrec/em28xx-new enough, > or need I some additional modules from > http://mcentral.de/hg/~mrec/v4l-dvb-kernel or from > http://linuxtv.org/hg/v4l-dvb ? > > dmesg output: > [ 122.474501] em28xx v4l2 driver version 0.0.1 loaded > [ 122.475502] em28xx new video device (2040:6502): interface 0, class 255 > [ 122.475502] em28xx: device is attached to a USB 2.0 bus > [ 122.475502] em28xx #0: Alternate settings: 8 > [ 122.475502] em28xx #0: Alternate setting 0, max size= 0 > [ 122.475502] em28xx #0: Alternate setting 1, max size= 0 > [ 122.475502] em28xx #0: Alternate setting 2, max size= 1448 > [ 122.475502] em28xx #0: Alternate setting 3, max size= 2048 > [ 122.475502] em28xx #0: Alternate setting 4, max size= 2304 > [ 122.475502] em28xx #0: Alternate setting 5, max size= 2580 > [ 122.475502] em28xx #0: Alternate setting 6, max size= 2892 > [ 122.475502] em28xx #0: Alternate setting 7, max size= 3072 > [ 123.027034] tuner' 5-0061: chip found @ 0xc2 (em28xx #0) > [ 123.027071] em28xx-i2c: using internal tuner, denying request to i2c tuner > module. > [ 123.033167] attach_inform: eeprom detected. > [ 123.060023] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 > 82 1e 6a 18 > [ 123.060038] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 > 00 00 00 00 > [ 123.060064] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 > 5b e0 00 00 > [ 123.060090] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 > 00 00 00 00 > [ 123.060116] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 123.060141] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 > [ 123.060168] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 > 34 00 30 00 > [ 123.060193] em28xx #0: i2c eeprom 70: 32 00 37 00 32 00 32 00 33 00 34 00 > 35 00 38 00 > [ 123.060219] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 > 56 00 20 00 > [ 123.060246] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 > 30 00 00 00 > [ 123.060272] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa > fd d0 28 89 > [ 123.060298] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 > 00 40 a2 8d > [ 123.060324] em28xx #0: i2c eeprom c0: 0a f0 74 02 01 00 01 79 11 00 00 00 > 00 00 00 00 > [ 123.060350] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa > fd d0 28 89 > [ 123.060377] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 > 00 40 a2 8d > [ 123.060403] em28xx #0: i2c eeprom f0: 0a f0 74 02 01 00 01 79 11 00 00 00 > 00 00 00 00 > [ 123.060433] EEPROM ID= 0x9567eb1a > [ 123.060435] Vendor/Product ID= 2040:6502 > [ 123.060438] AC97 audio (5 sample rates) > [ 123.060441] 500mA max power > [ 123.060444] Table at 0x24, strings = 0x1e82, 0x186a, 0x0000 > [ 123.064166] attach_inform: tvp5150 detected. > [ 123.108895] tvp5150 5-005c: tvp5150am1 detected. > [ 124.670619] successfully attached tuner > [ 124.674669] em28xx #0: V4L2 VBI device registered as /dev/vbi1 > [ 124.687467] em28xx #0: V4L2 device registered as /dev/video1 > [ 124.687560] input: em2880/em2870 remote control as /class/input/input6 > [ 124.694326] em28xx-input.c: remote control handler attached > [ 124.694331] em28xx #0: Found Hauppauge WinTV HVR (B2C0) > [ 124.694452] usbcore: registered new interface driver em28xx > [ 124.748895] em28xx-audio.c: probing for em28x1 non standard usbaudio > [ 124.748895] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > [ 124.748895] Em28xx: Initialized (Em28xx Audio Extension) extension > [ 124.814839] em2880-dvb.c: DVB Init > [ 126.421925] DVB: registering new adapter (em2880 DVB-T) > [ 126.421933] DVB: registering frontend 0 (Micronas DRX3973D DVB-T)... > [ 126.425638] Em28xx: Initialized (Em2880 DVB Extension) extension > > lsmod output > Module Size Used by > drx3973d 63812 1 > em28xx_dvb 15492 0 > dvb_core 73780 1 em28xx_dvb > em28xx_audio 8388 0 > xc3028_tuner 5504 1 > tvp5150 18256 0 > em28xx 311244 2 em28xx_dvb,em28xx_audio > > kaffeine output: > Tuning delay: 2296 ms > Tuning to: ZDF / autocount: 0 > Using DVB device 0:0 "Micronas DRX3973D DVB-T" > tuning DVB-T to 586000000 Hz > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > ............... > > Not able to lock to the signal on the given frequency > Frontend closed > > Any ideas ? >
yes support has been disabled temporary in order to get some newer devices work properly. I'll enable it again today, it need careful testing with the newer devices. Markus _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
