On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen <lydiankni...@gmail.com> wrote: > Thanks Valerio and Markus, > > That's exactly what I did per Valerio's suggestion and it worked, > now I'm facing the problem of not being able to tune any digital station > even > if I have extracted the es-Malaga (the city where I live in Spain) and run > the > scan program over it, but well... it's just another little step, other than > that, > the analog inputs are working really great (tested so far with zapping). >
what does dmesg show up? Markus > Thanks a lot :D > > Julio > > -------------------------------------------------- > From: "Markus Rechberger" <mrechber...@gmail.com> > Sent: Friday, January 09, 2009 3:13 PM > To: "Julio Meca Hansen" <lydiankni...@gmail.com> > Cc: <em28xx@mcentral.de> > Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 > firmware? > >> On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen >> <lydiankni...@gmail.com> wrote: >>> >>> Hi, >>> >>> I'm trying to support this device under my Linux distro (LFS based, so >>> custom made from sources) and I'm bit stucked. >>> >>> I have downloaded firmware_v2.tgz and included support for this device >>> in the kernel, but it fails at the time of loading the xc3028-v27.fw >>> file. >>> >> >> just try to compile the driver from mcentral.de, it has the firmware >> built in already. >> >> $ hg clone http://mcentral.de/hg/~mrec/em28xx-new >> $ cd em28xx-new >> $ make >> $ make install >> $ - reboot - >> >> if you installed the code from linuxtv.org you probably upgraded the >> whole media framework >> you would have to run make modules_install in the kernel sourcetree >> again in order to revert >> the media core, the em28xx-new repository only contains the driver and >> not the whole media framework. >> >> regards, >> Markus >> >>> Here is the output of dmesg: >>> >>> em28xx new video device (0ccd:005e): interface 0, class 255 >>> em28xx Doesn't have usb audio class >>> em28xx #0: Alternate settings: 8 >>> em28xx #0: Alternate setting 0, max size= 0 >>> em28xx #0: Alternate setting 1, max size= 0 >>> em28xx #0: Alternate setting 2, max size= 1448 >>> em28xx #0: Alternate setting 3, max size= 2048 >>> em28xx #0: Alternate setting 4, max size= 2304 >>> em28xx #0: Alternate setting 5, max size= 2580 >>> em28xx #0: Alternate setting 6, max size= 2892 >>> em28xx #0: Alternate setting 7, max size= 3072 >>> em28xx #0: chip ID is em2882/em2883 >>> Clocksource tsc unstable (delta = -62880812 ns) >>> tuner' 1-0061: chip found @ 0xc2 (em28xx #0) >>> em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de >>> 1c >>> em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 >>> 00 >>> em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 >>> 00 >>> em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 >>> 00 >>> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> 00 >>> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> 00 >>> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 >>> 00 >>> em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 >>> 00 >>> em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 >>> 00 >>> em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 >>> 03 >>> em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 >>> 00 >>> em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 >>> 00 >>> em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 >>> 00 >>> em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c >>> 03 >>> em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 >>> 00 >>> em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 >>> 00 >>> EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe >>> Vendor/Product ID= 0ccd:005e >>> AC97 audio (5 sample rates) >>> 500mA max power >>> Table at 0x27, strings=0x409e, 0x1cde, 0x346a >>> em28xx #0: >>> >>> em28xx #0: The support for this board weren't valid yet. >>> em28xx #0: Please send a report of having this working >>> em28xx #0: not to V4L mailing list (and/or to other addresses) >>> >>> xc2028 1-0061: creating new instance >>> xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner >>> i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: >>> 0xc04751/0xe0500f >>> input: SynPS/2 Synaptics TouchPad as /class/input/input5 >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: >>> 0xa04711/0xa04000 >>> input: SynPS/2 Synaptics TouchPad as /class/input/input6 >>> input: AT Translated Set 2 keyboard as /class/input/input7 >>> xc2028 1-0061: Error: firmware xc3028-v27.fw not found. >>> tvp5150 1-005c: tvp5150am1 detected. >>> em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 >>> em28xx-audio.c: probing for em28x1 non standard usbaudio >>> em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >>> em28xx #0: Found Terratec Hybrid XS (em2882) >>> >>> my xc3028-v27.fw file is located in /lib/firmware among the other files >>> in the firmware_v2.tgz file, and I extracted it using the >>> extract-xc3028.pl perl script using the Hauppauge windows driver as >>> stated in >>> >>> http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html >>> >>> I'm curious because my windows driver (under windows xp 32bit) is named >>> emBDA.sys, but I have tried the convert.c utility and it doesn't work, >>> it produces 0 output. >>> >>> Is it something more I need in order to correct this last step prior to >>> have my tv tuner working? >>> >>> Thanks in advance, >>> Julio >>> >>> >>> _______________________________________________ >>> Em28xx mailing list >>> Em28xx@mcentral.de >>> http://mcentral.de/mailman/listinfo/em28xx >>> > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx