Hej,

On Sun, Jan 18, 2009 at 2:00 AM, KLaus Lang <klau...@gmx.net> wrote:
> Hello!
> I have Ubuntu 8.1.0 and a Haupage Wintv HVR-900 M/R 65018/B3C0.
> I am afraid, but I think this model of WinTV HVR 900 is not fully supported
> by em28xx. I get no sound, even I tried to the firmware using this
> <http://blog.ikasweb.de/2008/10/26/hauppauge-hvr-900-mit-ubuntu-810/>
> advices.
>
> ---------------------------------------  dmesg output
>
> kl...@klaus-laptop:~$ dmesg | grep em28xx
> [   16.947818] em28xx v4l2 driver version 0.1.0 loaded
> [   16.957159] em28xx new video device (2040:6502): interface 0, class 255
> [   16.957166] em28xx Doesn't have usb audio class
> [   16.957169] em28xx #0: Alternate settings: 8
> [   16.957171] em28xx #0: Alternate setting 0, max size= 0
> [   16.957174] em28xx #0: Alternate setting 1, max size= 0
> [   16.957176] em28xx #0: Alternate setting 2, max size= 1448
> [   16.957179] em28xx #0: Alternate setting 3, max size= 2048
> [   16.957182] em28xx #0: Alternate setting 4, max size= 2304
> [   16.957184] em28xx #0: Alternate setting 5, max size= 2580
> [   16.957187] em28xx #0: Alternate setting 6, max size= 2892
> [   16.957189] em28xx #0: Alternate setting 7, max size= 3072
> [   16.958476] em28xx #0: chip ID is em2882/em2883
> [   17.151224] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03
> 82 1e 6a 18
> [   17.151237] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00
> 00 00 00 00
> [   17.151247] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00
> 5b e0 00 00
> [   17.151258] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01
> 00 00 00 00
> [   17.151268] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
> [   17.151279] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00
> [   17.151289] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03
> 34 00 30 00
> [   17.151299] em28xx #0: i2c eeprom 70: 33 00 30 00 35 00 37 00 35 00 35 00
> 38 00 33 00
> [   17.151310] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00
> 56 00 20 00
> [   17.151320] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00
> 30 00 00 00
> [   17.151330] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa
> fd d0 38 89
> [   17.151341] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77
> 00 40 df b3
> [   17.151352] em28xx #0: i2c eeprom c0: 3d f0 74 02 01 00 01 79 6b 00 00 00
> 00 00 00 00
> [   17.151362] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa
> fd d0 38 89
> [   17.151372] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77
> 00 40 df b3
> [   17.151383] em28xx #0: i2c eeprom f0: 3d f0 74 02 01 00 01 79 6b 00 00 00
> 00 00 00 00
> [   17.357602] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
> [   20.497231] em28xx #0: V4L2 device registered as /dev/video2 and
> /dev/vbi1
> [   20.497236] em28xx #0: Found Hauppauge WinTV HVR 900 (R2)
> [   20.510213] usbcore: registered new interface driver em28xx
> [   20.529804] em28xx-audio.c: probing for em28x1 non standard usbaudio
> [   20.529807] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
>
> ---------------------------------------  arecord output
>

try to follow the setup on mcentral.de, the firmware is embedded
within the driver there so you
don't have to bother about it. If you installed the driver from
linuxtv.org you have to reinstall your
current kernel.

regards,
Markus

>
>
> kl...@klaus-laptop:~$  arecord -l
> **** Liste von CAPTURE Geräten ****
> Karte 0: Intel [HDA Intel], Gerät 0: ALC880 Analog [ALC880 Analog]
>  Untergeordnete Geräte: 1/1
>  Untergeordnetes Gerät '0: subdevice #0
> Karte 0: Intel [HDA Intel], Gerät 2: ALC880 Analog [ALC880 Analog]
>  Untergeordnete Geräte: 2/2
>  Untergeordnetes Gerät '0: subdevice #0
>  Untergeordnetes Gerät '1: subdevice #1
> Karte 0: Intel [HDA Intel], Gerät 6: Si3054 Modem [Si3054 Modem]
>  Untergeordnete Geräte: 1/1
>  Untergeordnetes Gerät '0: subdevice #0
> Karte 1: default [Camera         ], Gerät 0: USB Audio [USB Audio]
>  Untergeordnete Geräte: 1/1
>  Untergeordnetes Gerät '0: subdevice #0
> Karte 2: SAA7134 [SAA7134], Gerät 0: SAA7134 PCM [SAA7134 PCM]
>  Untergeordnete Geräte: 1/1
>  Untergeordnetes Gerät '0: subdevice #0
> Or is there an solution for this problem?
>
> Kindly regards
> Klaus Lang
>
>
> _______________________________________________
> Em28xx mailing list
> Em28xx@mcentral.de
> http://mcentral.de/mailman/listinfo/em28xx
>

_______________________________________________
Em28xx mailing list
Em28xx@mcentral.de
http://mcentral.de/mailman/listinfo/em28xx

Reply via email to