>How does one CHANGE the setting on Custom Settings? Does one open it in >ResEdit and change one of the numbers in one of those boxes, and if so, >which one? Did the default on Custom Settings say "1"?
If you just install the Emailer Custom Settings, it is already set the correct way, so there is no need to worry. If you want to disable it (return to Emailer's Default), then just remove the Emailer Custom Settings file. That is the easiest way to deal with it. If you have some desire to do things manually, then don't bother downloading the Emailer Custom Settings file at all. Just open Emailer with ResEdit, go to the eCst resource and change the settings there. All the "Custom Settings" are already, and always have been, in Emailer... the Emailer Custom Settings file is just an external file containing a copy of that eCst resource, and Emailer knows to use those settings if the file is present rather than the ones in itself. But you can safely just change the ones in itself and have the same effect. If you run any of the p versions I've released (p1, p2, p3... the various Hacked versions), then the switch has already been made. All the hacked versions I've done have the Emailer Custom Settings already applied (the swap of the Account and Address info for the Mail From ID). If you want to undo it in the hacked versions, then you need ResEdit to go into Emailer or the Custom Settings file, and set the resource the way you want. -chris <http://www.mythtech.net> ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
