Jon Elson wrote: >This is probably for John Kasunich, but if somebody else knows.... > >I was trying to load my PPMC driver and specify a parallel port >address, in this case 0xecf8. So, I edited the default line in >univpwm_load.hal to look like this : > >loadrt hal_ppmc cfg="0xecf8" > >but it seemed to have no effect, the driver still tried to set >up at the 0x378 default address. The driver (hal_ppmc.c) seems >to have code to accept an address parameter, so I must be >specifying something wrong. > >Any ideas? > > * Usage: halcmd loadrt hal_ppmc port_addr=<addr1>[,addr2[,addr3]] * [extradac=<slotcode1>,[<slotcode2>]] * [extradout=<slotcode1,[<slotcode2>]]
Looks like it's called port_addr :) - Steve ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
