This fpga image was made for me by Peter at Mesa a while back. I used it successfully for a while, then built a 4 axis machine and discovered that stepgen3 indeed had two step pins and no dir pin. Peter fixed it and sent me an updated .bit file. Recently I've been using the file distributed with the 5i20 firmware for emc2. I _hope_ that this file has the stepgen3 fixed in it, and that it's just the .pin file that's wrong.
Peter or Seb, Can you check on this? I haven't made another 4 axis machine since I switched to using the "publicly distributed" version of SVST2_4_7147.bit, rather than the "fixed" copy Peter sent me after he fixed the "2 step pins" bug, so I wouldn't have noticed if the bug had returned. Thanks, Matt On Sun, 2009-09-06 at 02:57 +0000, Chris Morley wrote: > Not sure if it really matter but in the hostmot2 firmware data file > SVST2_4_7147.pin, there is a typo. Stepper #3 has two > step pins and no direction pin. > This is in Master ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
