Bugs item #2841156, was opened at 2009-08-20 10:21 Message generated for change (Comment added) made by cradek You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2841156&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: Motion Controller Group: None >Status: Closed >Resolution: Fixed Priority: 1 Private: No Submitted By: Matt Shaver (mshaver) Assigned to: John Kasunich (jmkasunich) Summary: Wrong Position Display Initial Comment: Environment: Ubuntu/EMC 8.04-- EMC2.3.3 -- AXIS -- Mesa 5I20 Card What Happens: After homing the position displays read X0.0000, Y0.0000, and Z0.0000, even though there are offset values in the emc.var file for the G54 (default) coordinate system. If a program is loaded and run, the part is machined correctly, but the position display is still wrong. It appears that the machine position is displayed, rather than the relative position as expected. I tried changing the displayed position via the AXIS menu from relative to machine and back with no change in the display. Once the program reaches the end, and an M2 is executed, the position display changes to the correct, relative values and remain that way. If the machine is powered up and homed, an M2 may be executed in MDI and the position display will immediately change from all zeros to the expected relative (G54) positions. As a workaround I tried putting [RS274NGC]RS274NGC_STARTUP_CODE = M2 in the .ini file, but this caused the startup of EMC2 to hang with no display or error message. This may be a separate bug, but I have included it here as it occurred as a result of the other problem. Thanks, Matt Shaver ---------------------------------------------------------------------- >Comment By: Chris Radek (cradek) Date: 2011-03-17 11:26 Message: I think this was a problem with lathe configs, which long ago did not open a preview program by default because AXIS didn't have a lathe splash screen. Now, the interpreter always opens a stub program, so I think this bug is gone. Let me know otherwise. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2841156&group_id=6744 ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
