skunkworks - let me understand this fully - do you want either:
a) on any toolchange entry move (TOOLCHANGE_POSITION, TOOL_CHANGE_AT_G30) have
moves for indexer axes bracketed with unlock/lock operations (first paragraph)
b) have something like an axis mask which limits movements during toolchange
positioning to axes explicitly enabled in this mask? ('it would be cool..')
these are quite different things - b) really doesnt make much sense without a)
I would assume that the mask from b) would be limited only to the 'entry moves'
during m6
---
note that all you want can be already done with the
toolchange-in-gcode-by-oword subs because you're not limited by the fixed
sequencing and options which are executed in a normal M6, and the normal Gx
moves seem to work fine with a locking indexer
I know the documentation isnt there yet - I swear I have the toolchanger.txt
file open in the other window ;-)
-m
Am 19.03.2011 um 20:14 schrieb SourceForge.net:
> Bugs item #3226864, was opened at 2011-03-19 14:14
> Message generated for change (Settings changed) made by skunkwork
> You can respond by visiting:
> https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3226864&group_id=6744
>
> Please note that this message will contain a full copy of the comment thread,
> including the initial issue submission, for this request,
> not just the latest update.
> Category: Motion Controller
> Group: None
> Status: Open
> Resolution: None
> Priority: 5
> Private: No
> Submitted By: skunkwork (skunkwork)
>> Assigned to: Chris Radek (cradek)
> Summary: Tool_change_at_g30 doesn't unlock rotory axis
>
> Initial Comment:
> commanding a tool change when Tool_change_at_g30=1 and Locking_indexer=1 in
> the ini - the rotory axis doesn't unlock but still tries to move the the g30
> rotary axis position. This causes a following error as the axis is locked.
> Commanding a G30 normally acts correctly - rotary axis unlocks - rotates then
> locks - then subsequent axis motion is done.
>
> It would be cool if there was a mechanism to set which axis will move instead
> of all moving.
>
> thanks
> sam
>
> ----------------------------------------------------------------------
>
> You can respond by visiting:
> https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3226864&group_id=6744
>
> ------------------------------------------------------------------------------
> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
> _______________________________________________
> Emc-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
